Head washers 92022-215

[Richard Q]

My parts manual says these washers, under the cylinder head nuts are, "Plain Washers." The ones on my bike, are 1.5mm thick copper washers.

I have found some for sale at £33.00 a set for a Z1, or £4.00 for just 1.2mm thick copper washers. Is there something special about these washers, or can I use any copper ones?

Richard

[Z1parR]

Nothing special about them , just an odd size .
You only need a copper washer under the outer 4 nuts .

[Richard Q]

Nothing special about them , just an odd size .
You only need a copper washer under the outer 4 nuts .

Thanks for that, the parts manual says they are 12 of them. Do the inner ones have steel washers or no washers?

Richard

[Z1parR]

Just steel washers on the inner eight .

[Richard Q]

Ta

[z1bman]

there was a discussion about this previously you can get the copper washers from e bay for about £ 8 for a full set of 12 the inner 8 are just steal washers but you can use copper if you wish

[malmojoe]

saved this in my ebay after someone else posted it, I haven't checked the size or bought them.

http://www.ebay.co.uk/itm/270848931025?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[Richard Q]

saved this in my ebay after someone else posted it, I haven't checked the size or bought them.

http://www.ebay.co.uk/itm/270848931025?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

You get a pack of 20 here for £4.00. 20 off- 22.3mm O/D X 11mm I/D X 1.2mm Thk. 1.2mm instead of 1.5mm, but I don't think that would cause much of a problem.

http://www.ebay.co.uk/itm/131337647590? ... EBIDX%3AIT

[Ginger Bear]

Great link..... I've just bought the last pack.

[ted1r]

They are available from merchandizing £12.00 a pack of copper ones. only a few packs left though and will not be replaced.

Ted