Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Swinging Arm A4

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Retro900

Swinging Arm A4

#1 PostAuthor: Retro900 » Tue May 05, 2009 11:33 pm

Does anyone know the width of it across the pivot end?
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#2 PostAuthor: Garn 1 » Wed May 06, 2009 1:06 am

BigMac, the standard sprockets for the Z1, Z1A & Z1B series and the Z900-A4 are 15 t front ~ 35 t rear. Don't know what the other available sizes are. RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#3 PostAuthor: Garn 1 » Wed May 06, 2009 1:21 am

Sorry Retro, wrong thread, above! I'll transfer it in a minute.
Now, width of the swing-arm bare is 220 mm.
When you add the bearing flanges you have 226 mm.
Then, allowing for grease caps you have 228 +- 1mm.
I have a frame somewhere I'll probably be able to give you a more accurate measurement.
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
Retro900

#4 PostAuthor: Retro900 » Wed May 06, 2009 2:50 am

Thanks those measurements will do to start with. I guess the frame measurement will give something similar, just gotta find a nice modern donor unit to fit.

cheers
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 15 guests