Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

debbens clutch cable

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

debbens clutch cable

#1 PostAuthor: mick znone » Sun Apr 26, 2009 7:04 pm

well, what a day thats been :x OK, has anyone come up against this one. i bought a clutch cable from debbens, next day delivery, great. the bloke says one cable fits all 1973 to 1980 z1 to z1000. on putting the nipple in the housing behind the sprocket plate, i find there is to much nipple and i cant fit the split pin through. do i grind it down? will that not weaken the strength of the remaining cable? or is there another solution? very gratefull of help guys, as its been a bit of a day.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence

User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:

#2 PostAuthor: Ginger Bear » Sun Apr 26, 2009 8:52 pm

Was it Cold Mick :?
I find that make's nipples Large :D :D :D

User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#3 PostAuthor: mick znone » Sun Apr 26, 2009 8:55 pm

ive got a spare one Bear :oops:
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence

User avatar
Z.O.A
100Club
100Club
Posts: 151
Joined: 31st Mar 2009
Location: Westmeath, Ireland.

#4 PostAuthor: Z.O.A » Sun Apr 26, 2009 8:55 pm

Ginger Bear wrote:Was it Cold Mick :?
I find that make's nipples Large :D :D :D

:rofl

User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#5 PostAuthor: mick znone » Sun Apr 26, 2009 10:37 pm

anyway, now ive stopped laughing enough to type again :roll: the question still stands, has anyone used a debbens clutch cable.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence

User avatar
Z.O.A
100Club
100Club
Posts: 151
Joined: 31st Mar 2009
Location: Westmeath, Ireland.

#6 PostAuthor: Z.O.A » Sun Apr 26, 2009 11:18 pm

I've always just used pattern cables when replacing them on bikes, Hi-lex are the company that do them and they never gave any problems once fitted, I bought a new clutch cable for this Z I have now on ebay for £9, they're bike specific too, perfect job.
I'm thinking of getting one of those nice hydraulic conversions from Germany at some stage down the line, after I sort everything else out firs tho :roll:

User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:

#7 PostAuthor: Ginger Bear » Mon Apr 27, 2009 5:52 am

Mick,
I have one of these fitted to my z1000 with no problems, doesn't help you I know, but I would give Debben a call & ask thier advice.

User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#8 PostAuthor: mick znone » Mon Apr 27, 2009 7:01 am

thanks Bear, that does help , that's just what i needed to hear, i now know that it must be a fault with the oversize nipple. i will phone them this morning. no complaints against debbens, these things happen.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence

User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#9 PostAuthor: mick znone » Mon Apr 27, 2009 8:41 am

ok, i phoned debbens, no problem obviosly. sending it back, when they have some more arrive from usa they are going to check if there is one with a smaller nipple. the one going back had a 5 mm nipple, i need a 3.5 mm nipple, didnt want to file it down as i didnt want to weaken it. the old onehas 3.5 mm. .......strange.......also to much nipple talk for me to handle :ek
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence

User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:

#10 PostAuthor: Ginger Bear » Mon Apr 27, 2009 9:06 am

Just measured my nipple....... 6.6mm at the fat end & 4.0mm at the skinny end :shock: :shock: :shock:

User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#11 PostAuthor: Pigford » Mon Apr 27, 2009 9:10 am

i think the new one for me Lawson was a bit fat :shock:
just file it down you lazy b*gg*r :!:
And on the 7th day... Zeds were created!

User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#12 PostAuthor: mick znone » Mon Apr 27, 2009 9:16 am

pm for you Piggy.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence

User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#13 PostAuthor: mick znone » Mon Apr 27, 2009 9:30 am

Ginger Bear wrote:Just measured my nipple....... 6.6mm at the fat end & 4.0mm at the skinny end :shock: :shock: :shock:

OK, thanks Bear, i think i should take the file to it then, if you have one at 6.6, means mine is smaller, story of my life :lol: thanks for checking mate, when i get back from a run i will get the file to it, also must phone Debbens and claim anxiety neurosis [also the story of my life] :lol:
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence

User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#14 PostAuthor: mick znone » Mon Apr 27, 2009 10:32 am

well b;gg;r me :nono :oops: i can be an idiot. i can file the front of the thick bit of nipple down, thus not touching the inner cable at all. :oops: :oops: :oops: didnt see it yesterday, can see it today. :smak2
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence

User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:

#15 PostAuthor: Ginger Bear » Mon Apr 27, 2009 10:42 am

Sometimes a problem just need's 'sleeping on' :D :D :D


Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 17 guests