Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

ZRX12 Swing Arm - Pasc Is Selling

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
PJ
Hardcore
Hardcore
Posts: 3538
Joined: 2nd Dec 2008
Location: Halesowen, West Mids

ZRX12 Swing Arm - Pasc Is Selling

#1 PostAuthor: PJ » Tue Apr 07, 2009 6:38 pm

Hi guys I have a Z900 in lots of bits in the shed that will be worked on in the next five years (8 month old girl and 4 Yr old boy) what would it take to make this swing arm fit - anyone done it?

cheers

pj
WHO NEEDS DRUGS - WHEN YOU HAVE A ZED!!
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#2 PostAuthor: zed1015 » Tue Apr 07, 2009 6:55 pm

Hi. I've fitted lots of different arms into lots of different bikes. Could be a simple job if it's narrower at the pivot and the spindles the same dia. Just a case of some spacers and bringing the rear shock frame mounts out in line with the arms. If its wider then your looking at machining the pivot down and maybe sleeving the bearing tube etc etc. Some measurements would be helpfull.
Top
Padders
Hardcore
Hardcore
Posts: 4875
Joined: 15th Jan 2006
Location: Grimsby Lincolnshire

#3 PostAuthor: Padders » Tue Apr 07, 2009 6:59 pm

You will need to extend the top shock mounts as the swingarm is wider at the bottom shock mounts. I have seen one fitted without this mod and the shocks had so much stiction due to being at an angle you could almost press down on the back and have a cup of tea before they rebounded.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 8 guests