Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Vaccum tap

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
mikey
Hardcore
Hardcore
Posts: 3792
Joined: 29th Nov 2005
Location: bristol

Vaccum tap

#1 PostAuthor: mikey » Sun Apr 05, 2009 5:52 am

On a z1000A2 vaccum tap when you put it on prime should fuel flow from both outlets as 1 outlet feeds 1+2 and other feeds 3+4 could this be the cause of my spluttering which now happens through out the rev range and not just at high revs as in my previous post.
Making the world a shiny place with a factory finish
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#2 PostAuthor: tlc » Sun Apr 05, 2009 6:08 am

Yes Mikey.

Prime just bypasses the vaccum aspect of the tap.

Could you have a blockage in the tap ?

Don`t forget that after a respray there will be loads of poop in the tank no matter how much you clean it beforehand :??
Asphalt Cowboy

Phil Churchett award winner 2015
Top
User avatar
mikey
Hardcore
Hardcore
Posts: 3792
Joined: 29th Nov 2005
Location: bristol

#3 PostAuthor: mikey » Sun Apr 05, 2009 6:17 am

Just had the vaccum bit off the tap chris blew it through seems there is water?? in the tap which i guess is in the carbs as well :cry:
Making the world a shiny place with a factory finish
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#4 PostAuthor: tlc » Sun Apr 05, 2009 6:21 am

`S alright Mikey.

Just drain the carb bowls down and away you go :D
Asphalt Cowboy



Phil Churchett award winner 2015
Top
User avatar
mikey
Hardcore
Hardcore
Posts: 3792
Joined: 29th Nov 2005
Location: bristol

#5 PostAuthor: mikey » Sun Apr 05, 2009 6:24 am

OK bud thanks ill try that see the Z1OC help machine strikes again :lol: :lol:
Making the world a shiny place with a factory finish
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 15 guests