Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
GB's Snotter! Oh Why, Oh Why? It's all over now..... Sort of
Moderators: KeithZ1R, chrisu, paul doran, Taffus
- RALPHARAMA
- Area Rep.
- Posts: 3407
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
Next time you want a battery, give me a shout. I did one for Mikey's Zed for £30 including aceeeed 

Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
- Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
- RALPHARAMA
- Area Rep.
- Posts: 3407
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
Not for £30 but I could have beaten £50 

Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
- Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
- Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
- london calling
- Hardcore
- Posts: 3992
- Joined: 16th Apr 2004
- Location: Loughborough, East Midlands
- paul doran
- Area Rep.
- Posts: 15910
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
- Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Took it around the block yesterday...................... 'Kin ell.... It's taken me 24hrs to stop clenching me arse cheeks!
It goes like fecketty feck............. it stops like an oil tanker
Those brakes are dire to say the least. I don't know if it's cos I'm spoiled with the stoppers on me 'muncher' or if the pads are oily or what. I certainly dont remember the brakes on my first Z1000 (15 years ago) being that bad.
Anyhow, that's had me looking on Ebay at front ends.............mmmm, still don't know where I'm going to go with this, but time will tell.
Just gonna go & finish fitting me new seat cover, I will report back later.
It goes like fecketty feck............. it stops like an oil tanker

Anyhow, that's had me looking on Ebay at front ends.............mmmm, still don't know where I'm going to go with this, but time will tell.
Just gonna go & finish fitting me new seat cover, I will report back later.
- Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Quick update.
Seat cover is pants. It is a 'tailored' job from ebay
I won't buy one of these again. Had it in the sunshine to get it all flexy, but it's not right. I have now ordered another from a local bike shop. Hope this one is better quality.
The other news is I won this pile of bits on ebay for £20.00
There are some useful parts in here. Starter solonoid, IC Ignighter, tank display + loads more.
I am struggling with time to do much with this at the moment. I really want to get my Z1000 sorted for the ACE.
Seat cover is pants. It is a 'tailored' job from ebay

I won't buy one of these again. Had it in the sunshine to get it all flexy, but it's not right. I have now ordered another from a local bike shop. Hope this one is better quality.


The other news is I won this pile of bits on ebay for £20.00


There are some useful parts in here. Starter solonoid, IC Ignighter, tank display + loads more.
I am struggling with time to do much with this at the moment. I really want to get my Z1000 sorted for the ACE.
Who is online
Users browsing this forum: No registered users and 6 guests