Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

29mm carbs

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
hillbilly
Hardcore
Hardcore
Posts: 2337
Joined: 31st Jan 2008
Location: lancashire

29mm carbs

#1 PostAuthor: hillbilly » Tue Jun 03, 2008 5:17 pm

i think i have got a set of early 29mm smoothbore carbs,can anyone verify this for me somehow,bin on z1 carb site,they dont have 17mm nut underneeth,but they do measure 29mm,if they are,has anyone got any floats for them. :shock:
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

#2 PostAuthor: RALPHARAMA » Tue Jun 03, 2008 6:28 pm

You really need to post some pix! There's a how to at the top of the discussion board. Then we can see what you're talking about, I know it's hard to start with but trust me it makes life a shit load easier in the long run :D
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Top
User avatar
ollie
Custard Cream
Custard Cream
Posts: 836
Joined: 13th Sep 2002
Location: north yorkshire

#3 PostAuthor: ollie » Tue Jun 03, 2008 7:44 pm

they could easily be from something else hillbilly ,need pics mate
zedsrus:"i don't know man ,i just got here myself !!"
Top
User avatar
PJones
100Club
100Club
Posts: 482
Joined: 1st Sep 2002
Location: West Midlands

Re: 29mm carbs

#4 PostAuthor: PJones » Tue Jun 03, 2008 9:14 pm

hillbilly wrote:i think i have got a set of early 29mm smoothbore carbs,can anyone verify this for me somehow,bin on z1 carb site,they dont have 17mm nut underneeth,but they do measure 29mm,if they are,has anyone got any floats for them. :shock:


Pics would be good, also where are you taking the measurement on the carb?
WHO NEEDS DRUG'S
Top
User avatar
hillbilly
Hardcore
Hardcore
Posts: 2337
Joined: 31st Jan 2008
Location: lancashire

#5 PostAuthor: hillbilly » Tue Jun 03, 2008 9:43 pm

inside measurement on engine side ,it is 29mm.and the top cover has 2 screws to hold it on.
Top
neilbarrett
Hardcore
Hardcore
Posts: 1353
Joined: 25th Feb 2008

#6 PostAuthor: neilbarrett » Thu Jun 05, 2008 10:20 pm

29mm smoothbores have a large hexagon drain plug on the bottom of the float bowls,
Top
neilbarrett
Hardcore
Hardcore
Posts: 1353
Joined: 25th Feb 2008

#7 PostAuthor: neilbarrett » Thu Jun 05, 2008 10:23 pm

got chrome slides in em as well,tops have 3 screws
Top
gbh
Custard Cream
Custard Cream
Posts: 867
Joined: 29th Aug 2005
Location: Japan

#8 PostAuthor: gbh » Fri Jun 06, 2008 12:49 pm

29mm smoothbores have brass floats. They also have only one fuel inlet located between carbs #2 and #3.
Top
gbh
Custard Cream
Custard Cream
Posts: 867
Joined: 29th Aug 2005
Location: Japan

#9 PostAuthor: gbh » Fri Jun 06, 2008 12:51 pm

Here's an eBay auction link to some 29mm smoothbores. There are quite a few pics fro you to compare to your carbs.
http://cgi.ebay.com/ebaymotors/MIKUNI-2 ... enameZWDVW
Top
gbh
Custard Cream
Custard Cream
Posts: 867
Joined: 29th Aug 2005
Location: Japan

#10 PostAuthor: gbh » Fri Jun 06, 2008 12:55 pm

Garden variety carbs described as 29 smoothbores. CAVEAT EMPTOR :!:
http://cgi.ebay.com/ebaymotors/29-SMOOT ... enameZWD1V
Top
Iain marshall
Area Rep.
Area Rep.
Posts: 1769
Joined: 16th Sep 2004

#11 PostAuthor: Iain marshall » Fri Jun 06, 2008 4:06 pm

Just a thought if you measure the older style 28s(z1 z1a z1b) at the engine side they measure nearly 29mm,just checked with my sets.Hope thats of some help
Got the Rex, just the Kat to get now...
Top
Rich
Hardcore
Hardcore
Posts: 2835
Joined: 4th Mar 2003

#12 PostAuthor: Rich » Fri Jun 06, 2008 5:55 pm

Not all Mikuni sbores have a 17mm bottom plug, some of the early ones have a drain plug, I also have a set with plastic floats. What they do have is a slide that goes around the needle jet block giving a straight venturi and a combined needle jet and emulsion tube and there is only one casting for both left and right side carbs with redundant bosses left undrilled.
Rich
 diplomacy is a form of art - I was never any good at art
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 17 guests