Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

switchgear help

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Pasc
Hardcore
Hardcore
Posts: 1656
Joined: 4th Jun 2006
Location: W Mids

switchgear help

#1 PostAuthor: Pasc » Mon Mar 10, 2008 6:52 pm

Does anyone know if there is such a thing available as a switchgear internals repair kit for the z1000 a3/a4 ?
Top
Ed Z1-R
Hardcore
Hardcore
Posts: 2347
Joined: 14th Oct 2005

#2 PostAuthor: Ed Z1-R » Mon Mar 10, 2008 11:42 pm

What EXACTLY do you need :idea:
Top
Pasc
Hardcore
Hardcore
Posts: 1656
Joined: 4th Jun 2006
Location: W Mids

#3 PostAuthor: Pasc » Tue Mar 11, 2008 8:25 am

Ed, the starter button packed up. On stripping the switch I found the non metalic insulator that surrounds the starter button contacts had fallen apart in places allowing the contacts to short out against each other. It's basically just the piece that the wires attatch to that requires replacing. Everything else is fine.
Top
Rich
Hardcore
Hardcore
Posts: 2835
Joined: 4th Mar 2003

#4 PostAuthor: Rich » Tue Mar 11, 2008 8:56 am

Is that the fibreboard part innermost, if you fancy making one let me know what thickness it is and I'll see if I have any that thick.
Rich
 diplomacy is a form of art - I was never any good at art
Top
Pasc
Hardcore
Hardcore
Posts: 1656
Joined: 4th Jun 2006
Location: W Mids

#5 PostAuthor: Pasc » Tue Mar 11, 2008 1:36 pm

Rich, thats the one. I might take you up on your offer but as I'm not great with electrics and small fiddly bits I'll wait and see if I can find a replacement switch or internals. I'd guess its about 2-3mm thick and probably approx 10mm by 10mm squareish.
Top
Hobbo
Hardcore
Hardcore
Posts: 2697
Joined: 18th Mar 2006
Location: Hull

switch

#6 PostAuthor: Hobbo » Tue Mar 11, 2008 4:05 pm

PASC

GOT SOME OLD SWITCHES IN THE GARAGE WILL TAKE A LOOK TONIGHT

PHIL
Never Dull in Hull Watch no 31
Top
Pasc
Hardcore
Hardcore
Posts: 1656
Joined: 4th Jun 2006
Location: W Mids

#7 PostAuthor: Pasc » Tue Mar 11, 2008 5:12 pm

Yer a star Phil. Ta very much. As I mentioned earlier I could get away with just the gubbins behind the starter button.
Thanks again.
Top
Hobbo
Hardcore
Hardcore
Posts: 2697
Joined: 18th Mar 2006
Location: Hull

switch

#8 PostAuthor: Hobbo » Tue Mar 11, 2008 10:20 pm

PASC

SORRY TO RAISE YOUR HOPES BUT NO JOY MUST HAVE GONE WITH THE CLEAROUT I HAD A COUPLE OF WEEKS A GO SORRY

PHIL
Never Dull in Hull Watch no 31
Top
Pasc
Hardcore
Hardcore
Posts: 1656
Joined: 4th Jun 2006
Location: W Mids

#9 PostAuthor: Pasc » Wed Mar 12, 2008 5:39 pm

Thats Ok Phil, I think I've found a z650 switch on ebay that I can butcher for the bits I need.
Thanks for looking.
Top
Ed Z1-R
Hardcore
Hardcore
Posts: 2347
Joined: 14th Oct 2005

#10 PostAuthor: Ed Z1-R » Thu Mar 13, 2008 12:27 am

Will have a shufti at the archives and let you know............
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 13 guests