Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Piranha ignition query.

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Pasc
Hardcore
Hardcore
Posts: 1656
Joined: 4th Jun 2006
Location: W Mids

Piranha ignition query.

#1 PostAuthor: Pasc » Sun Feb 24, 2008 2:46 pm

I need to double check the timing of my piranha ignition. Pigford has kindly offered some info on fully advanced degree info. Where I'm puzzled is, how do I know the actual trigger point ? Obviously I cant use a bulb or multimeter to indicate the firing point and there are no lights on the control box to indicate the firing point. The ignition has 2 adjustable eyes on a back plate for 1/4 and 2/3 and a trigger disc with a cutout to fire each pair of pots.
Top
HowieD
100Club
100Club
Posts: 336
Joined: 5th Feb 2008
Location: Lincoln

#2 PostAuthor: HowieD » Sun Feb 24, 2008 2:56 pm

Hi,
I used to connect a spare spark plug onto the HT lead and rest it on the Head. there will be a spark as the edge of the notch centres on the lens.

I think this info is in the instructions?

Hope this helps

Regards
H
CD185, Maggot, Z1-R, Horace
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#3 PostAuthor: Pigford » Sun Feb 24, 2008 2:57 pm

Pasc, :roll:

Disconnect a plug lead, and fit an old plug in (an NGK may be up to it :?: ) and you can see a spark as it triggers.....

I'd come & do it for u, but the ironings building up :evil:
And on the 7th day... Zeds were created!
Top
Pasc
Hardcore
Hardcore
Posts: 1656
Joined: 4th Jun 2006
Location: W Mids

#4 PostAuthor: Pasc » Sun Feb 24, 2008 3:16 pm

Ah ha, did think about that one but wasn't sure if it would be accurate enough. Cheers guys I'll give it a whirl.
Pigford, re the ironing. Just do what I do and only iron the bits that show. ie if the arms of a shirt are covered by a jacket just iron the front bit about 2 inches either side of the buttons. Jobs a good un.
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

#5 PostAuthor: RALPHARAMA » Sun Feb 24, 2008 3:49 pm

I'm not a big fan of static timing. Get it near enough and then use a timing light. I haven't got one and unless I fall out with my mate John I can't see any reason to buy one! His is Snap-On - I only borrow the best!

Re ironing: better still don't wear anything that needs ironing. If the bride wants me to wear something that requires ironing .... I hardly ever take her out anyway, though I did offer to take her to the Bristol Classic Bike Show ... she declined :??
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Top
Pasc
Hardcore
Hardcore
Posts: 1656
Joined: 4th Jun 2006
Location: W Mids

#6 PostAuthor: Pasc » Sun Feb 24, 2008 4:46 pm

Dunno whats wrong with my memory lately. Got a decent strobe gun in the garage. I'll give it a whirl. At what sort of RPM is the ignition fully advanced ? 4K ?
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#7 PostAuthor: Pigford » Sun Feb 24, 2008 4:51 pm

Pasc,

If u static at fully advanced, you CANT get it wrong.

If you use a degree dial to ensure you know where the 40 deg mark is, and set timing to fire on full advanced, this is the BEST & most acurrate way :wink:
And on the 7th day... Zeds were created!
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 14 guests