Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Dyna wiring question

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

Dyna wiring question

#1 PostAuthor: tlc » Sun Mar 27, 2016 8:36 pm

I now have a spangly new Dyna2000 fitted.

On returning from my inaugural ride I noticed that the off/run switch does not function.
Could this be because the positive lead should be wired through that switch?
Asphalt Cowboy

Phil Churchett award winner 2015

User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#2 PostAuthor: Pigford » Sun Mar 27, 2016 9:08 pm

One thing to bear in mind is a good power supply - and personally I don't have 100% confidence in the "spark" power running up and down the wiring loom - via the kill switch :??

Unless you've got a new loom or better still a "Wired for George" type conversion.
And on the 7th day... Zeds were created!

User avatar
ZedHead
Hardcore
Hardcore
Posts: 1950
Joined: 9th May 2009
Location: North Yorkshire
Contact:

#3 PostAuthor: ZedHead » Sun Mar 27, 2016 9:22 pm

Pigford wrote:One thing to bear in mind is a good power supply - and personally I don't have 100% confidence in the "spark" power running up and down the wiring loom - via the kill switch :??

Unless you've got a new loom or better still a "Wired for George" type conversion.


What he said :D

User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#4 PostAuthor: tlc » Mon Mar 28, 2016 6:00 am

Thanks Mark.

I'll do a relay mod.
Asphalt Cowboy



Phil Churchett award winner 2015


Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 9 guests