Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1r Firing problem

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

Z1r Firing problem

#1 PostAuthor: PAULJAC47 » Thu Nov 19, 2015 6:55 pm

Been working on a mates Z1r,bike would stop firing on no2 pot, so fitted new coils ,new Dyna s,new leads,Nippon Denso plugs,new plug caps,Still stopped firing on N02 pot,swapped leads 2 and 3 now stopped firing on no3 and n02 fires ok good 12volts at coils(wired George mod)..Any thoughts?
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
User avatar
ted1r
Area Rep.
Area Rep.
Posts: 2907
Joined: 29th May 2008
Location: Cleethorpes Lincolnshire

post

#2 PostAuthor: ted1r » Thu Nov 19, 2015 7:00 pm

Compression test Paul.

Ted
"Work this is why I did it"

"I've had more minutes than I have left"

Z1R D1
Granada
vantastic Transit........
KLE650
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#3 PostAuthor: PAULJAC47 » Thu Nov 19, 2015 7:05 pm

All good Ted,shims checked,timing all good..
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."

-Han Solo



You can't polish a turd, but you can roll it in glitter



Salad is what real food eats.

Anon



PUM 673
Top
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:
Contact Ginger Bear

#4 PostAuthor: Ginger Bear » Thu Nov 19, 2015 7:13 pm

Paul,

It must be either the lead, plug cap or output post on the coil....
Image

# 104

Phil Churchett Award Winner 2011 & 2016 :D
Buzzworkz Best Modified Zed 2016
Top
User avatar
jimmock
Hardcore
Hardcore
Posts: 8947
Joined: 1st Dec 2009
Location: Central Scotland, near Zedinburgh.

#5 PostAuthor: jimmock » Thu Nov 19, 2015 7:14 pm

It is obviously an ignition component failure.

The problem has been swapped over to #3
That means EVERYTHING with #2 is good.
Jimmock. :wnkr


SPEED IS JUST A QUESTION OF MONEY...HOW FAST DO 'YOU' WANT TO GO?

I hate people I don't like !
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#6 PostAuthor: PAULJAC47 » Thu Nov 19, 2015 7:29 pm

My thoughts exactly guys, but all new components and the fault is exactly the same,new leads, plugs .dyna,caps,might try swapping coil and leads for 1 and 4 with coil for 2 and 3?
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."

-Han Solo



You can't polish a turd, but you can roll it in glitter



Salad is what real food eats.

Anon



PUM 673
Top
User avatar
ted1r
Area Rep.
Area Rep.
Posts: 2907
Joined: 29th May 2008
Location: Cleethorpes Lincolnshire

post

#7 PostAuthor: ted1r » Thu Nov 19, 2015 7:42 pm

Well if you done all that Paul it can only be Fookin woodworm try Ronseal. :lol: :lol: :lol: :lol:
"Work this is why I did it"



"I've had more minutes than I have left"



Z1R D1

Granada

vantastic Transit........

KLE650
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#8 PostAuthor: PAULJAC47 » Thu Nov 19, 2015 7:43 pm

Would Wickes own make do the job Ted?
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."

-Han Solo



You can't polish a turd, but you can roll it in glitter



Salad is what real food eats.

Anon



PUM 673
Top
User avatar
KeithZ1R
Moderator
Posts: 3368
Joined: 15th May 2005
Location: Bury

#9 PostAuthor: KeithZ1R » Thu Nov 19, 2015 8:37 pm

forgive me big lad...but did you swap the leads in the out puts as well or just the lead cos if its following the lead take one of the myriad of other bikes you have and try that :lol:
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
User avatar
jimmock
Hardcore
Hardcore
Posts: 8947
Joined: 1st Dec 2009
Location: Central Scotland, near Zedinburgh.

#10 PostAuthor: jimmock » Thu Nov 19, 2015 9:23 pm

Maybe when you are in under the tank you are disturbing something??
Jimmock. :wnkr





SPEED IS JUST A QUESTION OF MONEY...HOW FAST DO 'YOU' WANT TO GO?



I hate people I don't like !
Top
User avatar
jimmock
Hardcore
Hardcore
Posts: 8947
Joined: 1st Dec 2009
Location: Central Scotland, near Zedinburgh.

#11 PostAuthor: jimmock » Thu Nov 19, 2015 9:25 pm

If it was a coil issue BOTH 2+3 would be down.

Swapping it would mean 1+4 being down.

The HT lead in question isn't arcing out.

Try running it in the garage with the lights out.
Jimmock. :wnkr





SPEED IS JUST A QUESTION OF MONEY...HOW FAST DO 'YOU' WANT TO GO?



I hate people I don't like !
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#12 PostAuthor: PAULJAC47 » Thu Nov 19, 2015 10:37 pm

Keith brand new coils with sealed in leads,new caps,plugs,swapped 2 and 3 over at plug cap end and fault transferred from 2 to 3.But works when you first fire her up just fails after a while?

Jim tank is off,no arcing.

Was same fault b4 we replaced all the ignition components!

One thing i have noticed is that the lead that goes to the pot that fails ,either 2 or 3 shows intermittent firing when you put the clamp from the strobe light across the ht lead
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."

-Han Solo



You can't polish a turd, but you can roll it in glitter



Salad is what real food eats.

Anon



PUM 673
Top
User avatar
jimmock
Hardcore
Hardcore
Posts: 8947
Joined: 1st Dec 2009
Location: Central Scotland, near Zedinburgh.

#13 PostAuthor: jimmock » Thu Nov 19, 2015 10:43 pm

"One thing i have noticed is that the lead that goes to the pot that fails ,either 2 or 3 shows intermittent firing when you put the clamp from the strobe light across the ht lead"

Paul, sounds like that new lead is breaking down ??
Jimmock. :wnkr





SPEED IS JUST A QUESTION OF MONEY...HOW FAST DO 'YOU' WANT TO GO?



I hate people I don't like !
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#14 PostAuthor: PAULJAC47 » Thu Nov 19, 2015 10:47 pm

Weird that because that was what the old lead and coil were doing with the strobe?
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."

-Han Solo



You can't polish a turd, but you can roll it in glitter



Salad is what real food eats.

Anon



PUM 673
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#15 PostAuthor: z1bman » Thu Nov 19, 2015 11:48 pm

even new parts can be faulty don't presume because its new it is without faults
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests