Z1 Front Hub Seal

wheelysteve · #1 PostAuthor: **wheelysteve** » Tue Jun 30, 2015 8:06 am

Anyone got a new front hub seal (speedo drive side). Part no. 92050-046.

Front brake not working too well as the disc is being sprayed with grease on a long run. Stops the brake squeaking though !!

Is there any special grease required for the speedo drive or is the standard castrol stuff ok as I seem to have it coming out of the seal and speedo cable fitting a the wheel end since I cleaned and re greased it?

Cheers Steve

Jumbo · #2 PostAuthor: **Jumbo** » Tue Jun 30, 2015 7:37 pm

This is only an oil seal. I just ordered one from Ebay. If you are not sure of the sizes I can check what I bought.

wheelysteve · #3 PostAuthor: **wheelysteve** » Tue Jun 30, 2015 7:58 pm

Cheers Jumbo, I would appreciate the dimensions.

wheelysteve · #4 PostAuthor: **wheelysteve** » Thu Jul 02, 2015 2:01 pm

The markings on the seal show:

BJN-C2 54 65 6

Which I take to mean it's a 54mm internal dia, 65mm external dia and 6mm seat width. I can't find this size listed in the searches I've done. Is it a one off size for the Z ?

Coose · #5 PostAuthor: **Coose** » Thu Jul 02, 2015 2:43 pm

This?

http://www.ebay.co.uk/itm/KAWASAKI-NOS-FRONT-HUB-OIL-SEAL-Z1-H2-H1-/231436589261?_trksid=p2141725.m3641.l6368

wheelysteve · #6 PostAuthor: **wheelysteve** » Thu Jul 02, 2015 5:19 pm

That's the one , but he is away till 14th July and I was hoping to get it in the next couple of days. Guess i'll have to wait until Dave is back. (UKS1).

Jumbo · #7 PostAuthor: **Jumbo** » Thu Jul 02, 2015 5:47 pm

Apologies I misunderstood the seal. I thought it to be the seal inside the hub. Also I have an A4 which looking on CMSL was a different part number even for that seal. Mine was 17x23x3mm Nitrile Rubber Metric Oil Seal.

I looked on Simply Bearings Website and your seal does not appear to be a common size.

Z1 Front Hub Seal

Z1 Front Hub Seal

Who is online