Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

630 to 530 conversion

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

630 to 530 conversion

#1 PostAuthor: PAULJAC47 » Tue Jun 10, 2014 7:47 pm

Guyz anyone know a source in the Uk for kits to convert 630 to 530 chains(Suzuki Gs1000)??
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
User avatar
ADRIAN H
Hardcore
Hardcore
Posts: 4174
Joined: 21st Mar 2009
Location: The Brunswick, Charminster. Bmth

#2 PostAuthor: ADRIAN H » Tue Jun 10, 2014 9:10 pm

Z1 enterprises list (I know its not UK - but does give you the sprocket references).

http://www.z1enterprises.com/ListItems. ... 1309010000
👀 👀 👀
email - adrianhorsfield@live.co.uk
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#3 PostAuthor: zed1015 » Tue Jun 10, 2014 11:59 pm

You need a JTR816 rear sprocket. List of models in this link.
http://www.jtsprockets.com/catalogue/sprocket/JTR816

Then you need a JTF513 front sprocket.
Probably the 18 tooth of a 1250 bandit would be best.
http://www.jtsprockets.com/catalogue

The go buy something like a 120 link chain and chop off what you don't need.
Top
snotie1965
100Club
100Club
Posts: 389
Joined: 28th Mar 2013
Location: Swindon Wiltshire

#4 PostAuthor: snotie1965 » Wed Jun 11, 2014 8:37 am

Debben performance do all the kits ,i just done my uni-trak , Talon rear, sprocket gold ,and top of the range DID also gold ,bike feels loads smoother and gear change has got better ,more precise . :D cost a bit more than a standard set up ,but i think most big bikes run 530 now ?
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#5 PostAuthor: PAULJAC47 » Wed Jun 11, 2014 3:16 pm

Ta Lads
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."

-Han Solo



You can't polish a turd, but you can roll it in glitter



Salad is what real food eats.

Anon



PUM 673
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#6 PostAuthor: Garn 1 » Mon Jun 16, 2014 1:15 am

Sorry for the lateness of my reply.
I wanted to mention about the locking tab-washer. Not sure what they have on the Suzuki, however every 530 front sprocket I've purchased has two 6mm screw holes at a different PCD than the usual small tab-hole.
I usually make up a tab washer as per pic.

Image
I used to make them out of sheet stainless until I stuffed my hole saw!
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
garyd
Hardcore
Hardcore
Posts: 2558
Joined: 11th Jun 2011
Location: West of London

#7 PostAuthor: garyd » Mon Jun 16, 2014 8:49 pm

"until I stuffed my hole saw"

Dirty sod...no wonder it ran away
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 11 guests