Put the Mikuni VM28SS carbs back on the Mark II today & have a problem with fuel leaking.
These are the same carbs that are fitted to the Z1R
Leaking from the fuel line T-Piece in between carbs 2&3 - had a look on the net & it appears that the part no. is 92005-1010 but no longer available - couldn't see any individual seals.
(I suspect that modern fuel has attacked the seal)
So perhaps the fuel feed joints between carbs 1/2 & carbs 3/4 may also need to be replaced - looked up the part no. 92005-1009 & these are also no longer available.
Haven't taken the carbs apart yet so don't know whether there are any seals that can be replaced ?
But wondering if anyone has had this problem & come up with fix?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Mark II Carb problems
Moderators: KeithZ1R, chrisu, paul doran, Taffus
There are brass replacements that can be sourced for this,cant recollect where from though will have a dig!!!http://www.nrp-carbs.co.uk/shop/index.php?route=product/category&path=43
Here you go!!!!!
Here you go!!!!!
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Who is online
Users browsing this forum: No registered users and 17 guests