Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Sparkless

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Richard Q
Custard Cream
Custard Cream
Posts: 596
Joined: 24th Feb 2014
Location: Sheffield

Sparkless

#1 PostAuthor: Richard Q » Sun Mar 30, 2014 3:11 pm

I have finished mucking around with my Z900 for the time being, and have taxed it from Tuesday. Tried to start it yesterday but it didn't fire up, but did fire a couple of times. When I turned the ignition off and took the keys out (one swift movement :?? ) it backfired, scaring the living daylights out of me.

Now it won't fire at all, not even a glimmer. I have taken one of the plugs out and spun the engine over, and there is no spark at all.

It is fitted with a Dyna-s ignition system, coils and leads.

Any ideas where to start? I have rebuilt cars from the ground up, but this is my first attempt at a bike rebuild, so on a bit of a learning curve :shock:

Richard
Top
User avatar
PJ
Hardcore
Hardcore
Posts: 3538
Joined: 2nd Dec 2008
Location: Halesowen, West Mids

#2 PostAuthor: PJ » Sun Mar 30, 2014 3:17 pm

Hi Richard,

Take the right hand with apart and clean all the connections on the kill switch
It might be that !!!
Last edited by PJ on Sun Mar 30, 2014 3:46 pm, edited 1 time in total.
WHO NEEDS DRUGS - WHEN YOU HAVE A ZED!!
Top
User avatar
firyembers
Custard Creem
Posts: 223
Joined: 11th Jun 2011
Location: Back And Loving Life In Cardiff

#3 PostAuthor: firyembers » Sun Mar 30, 2014 3:44 pm

Check you got 12 volts going to the dyna pickups.when you pass a magnet past the reluctor it should fire 2 coils and the other side should fire the other pair of coils.

I have had a Dyna fail,unknown reason,excepy Dyna would not repair it.
An eMail to the shop I bought the gpz from replaced free of charge.

If it fails again I am going back to standard pick ups,never had any bother with the J pick ups and ignitor,used it also on my Z900A4
Life shouldn't be a journey to the grave with the intention of arriving safely in a well-preserved body, but rather to skid in sideways, cigar in one hand, beer in the other, body used up, totally worn-out and screaming, "WOO HOO, what a ride!"
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#4 PostAuthor: z1bman » Sun Mar 30, 2014 5:15 pm

did you leave the ignition switched on ? if so it has probably fried the dyna s module.
Top
User avatar
Richard Q
Custard Cream
Custard Cream
Posts: 596
Joined: 24th Feb 2014
Location: Sheffield

#5 PostAuthor: Richard Q » Sun Mar 30, 2014 5:26 pm

Thanks for the suggestions, I'll give them a go tomorrow.

Ignition was only on when I was spinning the motor.

Cheers

Richard
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#6 PostAuthor: z1bman » Sun Mar 30, 2014 5:34 pm

dyna s ignition system testing (download)

http://www.dynaonline.com/skins/downloads/Default.aspx
Top
User avatar
Richard Q
Custard Cream
Custard Cream
Posts: 596
Joined: 24th Feb 2014
Location: Sheffield

#7 PostAuthor: Richard Q » Tue Apr 01, 2014 3:06 pm

hmm... changed the plugs, fired up straight away and runs like a good'un.

How bizarre that all the plugs failed at the same time?

:shock:
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#8 PostAuthor: PAULJAC47 » Tue Apr 01, 2014 3:49 pm

Ngk by any chance?,flood or dirty em once and you may as well bin em!
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
User avatar
firyembers
Custard Creem
Posts: 223
Joined: 11th Jun 2011
Location: Back And Loving Life In Cardiff

#9 PostAuthor: firyembers » Tue Apr 01, 2014 4:35 pm

I have always been a NGK plug man,never used anything else,so your flood and bin them is surprising..

What is your choice of plug that is better suited,i would not mind changing camps if better suited for reliability.
Life shouldn't be a journey to the grave with the intention of arriving safely in a well-preserved body, but rather to skid in sideways, cigar in one hand, beer in the other, body used up, totally worn-out and screaming, "WOO HOO, what a ride!"
Top
User avatar
Richard Q
Custard Cream
Custard Cream
Posts: 596
Joined: 24th Feb 2014
Location: Sheffield

#10 PostAuthor: Richard Q » Tue Apr 01, 2014 9:48 pm

NGK indeed :shock: . I have always used them in my other classic, a Rover P6 with a V8 in it, and they have never let me down, not once.

Shame if they are crap as I just bought a box of 10 of them :oops:

Richard
Top
User avatar
Mowjoe
100Club
100Club
Posts: 122
Joined: 30th Jan 2014
Location: Newbury UK

#11 PostAuthor: Mowjoe » Wed Apr 02, 2014 5:28 am

http://z1ownersclub.co.uk/forum/viewtop ... highlight=

See this thread about crap NGK plugs. I just fitted Denso so will see how they go, so far so good!
Z900-A4 looking like a Z1B!
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#12 PostAuthor: PAULJAC47 » Wed Apr 02, 2014 4:07 pm

firyembers wrote:I have always been a NGK plug man,never used anything else,so your flood and bin them is surprising..

What is your choice of plug that is better suited,i would not mind changing camps if better suited for reliability.


Denso had too many probs with Ngk...
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."

-Han Solo



You can't polish a turd, but you can roll it in glitter



Salad is what real food eats.

Anon



PUM 673
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests