gpz1100 ut

snotie1965 · #1 PostAuthor: **snotie1965** » Sat Feb 15, 2014 3:05 pm

I have just got the standard paint work back on my unitrak (tank warning light console) , how do i go about fitting the battery warning wire ? could a buy the part that goes into the battery ? and also where on the loom is the wire located,and what colour is the wire ? I do not want to strip back to much of the tidy loom to find it ?

Any help would be appreciated ,Andy ......

#2 PostAuthor: **Ginger Bear** » Sat Feb 15, 2014 3:18 pm

The wire is pink & exits the loom very close to the battery. If you connect it to +12v it will stop the warning light flashing.
It was also possible to buy the sensor that replaces one of the battery caps when I did mine, but that was probably around 4 years ago now.

garyd · #3 PostAuthor: **garyd** » Sat Feb 15, 2014 4:36 pm

saw one on ebay in the last few days...so they are still available.

johnA · #4 PostAuthor: **johnA** » Sun Feb 16, 2014 12:13 am

you can still get them from cradley kawasaki and i think wemoto might have them also.
hope this helps john

snotie1965 · #5 PostAuthor: **snotie1965** » Mon Feb 17, 2014 12:17 pm

Cheers for the advice lads ,

I cant find one on "Wemoto" or "evilbay" so i will ring "cradley Heath"

Thanks for your help .

Gus · #6 PostAuthor: **Gus** » Mon Feb 17, 2014 12:53 pm

Is this it?

http://www.ebay.co.uk/itm/KAWASAKI-GPZ7 ... 51b8ef145a

Gus

#7 PostAuthor: **Ginger Bear** » Mon Feb 17, 2014 12:53 pm

Part No. is 27010-1177

http://www.ebay.co.uk/itm/KAWASAKI-NOS- ... 0741848027

I'd try Z-Power.

Gus · #8 PostAuthor: **Gus** » Mon Feb 17, 2014 1:18 pm

Hi Steve.

Are you well?

I thought the part number 26012-1053 from Kawasaki.com.

http://www.wemoto.com/parts/picture/hl-705500/

Any good?

#9 PostAuthor: **Ginger Bear** » Mon Feb 17, 2014 1:23 pm

Hi Gus, I am well, thank you.

This is what I got from Kawasaki.com;

https://www.kawasakiepc.com/PartInfoDet ... 27010-1177

Googling the part No. seems to support the fact that it's correct. :??

Gus · #10 PostAuthor: **Gus** » Mon Feb 17, 2014 2:34 pm

Hmmmmm.

I'm Jimmocked

https://www.kawasakiepc.com/PartInfoDet ... 26012-1053

I think this must be a battery with a built in sensor

Cheers

snotie1965 · #11 PostAuthor: **snotie1965** » Mon Feb 17, 2014 2:42 pm

Gus wrote:Hi Steve.

Are you well?

I thought the part number 26012-1053 from Kawasaki.com.

http://www.wemoto.com/parts/picture/hl-705500/

Any good?

That looks like it will do ? the original bit is way to much money !! otherwise i will connect up to live feed and forget about it ?
thanks again lads for your help .....

steve bowdler · #12 PostAuthor: **steve bowdler** » Mon Feb 17, 2014 8:49 pm

http://www.kawasakioriginalparts.com/ka ... 7010-1177+

snotie1965 · #13 PostAuthor: **snotie1965** » Tue Feb 18, 2014 11:18 am

Gus wrote:Hi Steve.

Are you well?

I thought the part number 26012-1053 from Kawasaki.com.

http://www.wemoto.com/parts/picture/hl-705500/

Any good?

That looks like it will do ? has anyone used this type before ? if not i will go for the original kwak one Â£18 seems a fairish price ?

#14 PostAuthor: **Ginger Bear** » Tue Feb 18, 2014 12:48 pm

I have the genuine item for that price. I had a box of spares that contained a pattern sensor & it just didn't fit properly. :cry:

snotie1965 · #15 PostAuthor: **snotie1965** » Tue Feb 18, 2014 1:08 pm

Ginger Bear wrote:I have the genuine item for that price. I had a box of spares that contained a pattern sensor & it just didn't fit properly.

Cheers mate , that is what i will do then ! like you say "it will fit properly"

Thanks Andy .........

gpz1100 ut

gpz1100 ut

Who is online