Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

coil mod

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
royboy
Regular Poster
Posts: 75
Joined: 1st Jan 2013
Location: west london

coil mod

#1 PostAuthor: royboy » Sun Sep 22, 2013 5:08 pm

hi all having problems with mod wired up as per instructions but with kill switch in off i'am getting power and when in run there is no power,
I have electronic ignition boyer bronsden not dyna s.do I have to some thing
to that,only getting 9.46 at coils before.
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#2 PostAuthor: z1bman » Sun Sep 22, 2013 5:33 pm

what colour wire from the kill switch have you connected to terminal 86 of the relay?
Top
royboy
Regular Poster
Posts: 75
Joined: 1st Jan 2013
Location: west london

mod

#3 PostAuthor: royboy » Sun Sep 22, 2013 8:09 pm

hi z1bman
put the wire to the yellow wire from one of the coils.
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#4 PostAuthor: z1bman » Sun Sep 22, 2013 8:18 pm

is the other coil still connected to the yellow/red wire ?
Top
royboy
Regular Poster
Posts: 75
Joined: 1st Jan 2013
Location: west london

#5 PostAuthor: royboy » Sun Sep 22, 2013 8:36 pm

hi no main wire disconnected,and new wire to 87 is connected
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#6 PostAuthor: z1bman » Sun Sep 22, 2013 8:44 pm

85 on the relay should be earth + 30 should positive fuse protected


Image
Last edited by z1bman on Sun Sep 22, 2013 9:42 pm, edited 2 times in total.
Top
royboy
Regular Poster
Posts: 75
Joined: 1st Jan 2013
Location: west london

#7 PostAuthor: royboy » Sun Sep 22, 2013 8:51 pm

hi that is what I have got
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#8 PostAuthor: z1bman » Sun Sep 22, 2013 9:00 pm

disconnect the yellow/red from the relay + see if you lose the 12v feed from this wire when you turn the kill switch of
Top
royboy
Regular Poster
Posts: 75
Joined: 1st Jan 2013
Location: west london

#9 PostAuthor: royboy » Sun Sep 22, 2013 9:11 pm

will look in the morning
Top
royboy
Regular Poster
Posts: 75
Joined: 1st Jan 2013
Location: west london

#10 PostAuthor: royboy » Tue Sep 24, 2013 6:00 pm

I have sorted it out now,it was the 5 pin relay for some reason pin 87a was allways live,put 4 pin relay on now all is working as it should.
thanks for the help
Top
User avatar
KeithZ1R
Moderator
Posts: 3368
Joined: 15th May 2005
Location: Bury

#11 PostAuthor: KeithZ1R » Tue Sep 24, 2013 7:20 pm

royboy wrote:I have sorted it out now,it was the 5 pin relay for some reason pin 87a was allways live,put 4 pin relay on now all is working as it should.
thanks for the help


5 pin relays are normally "changeover" units they have a common, normally open and normally closed and two connections for the coil
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 19 guests