1. Whats the best way to remove grips without damaging them? existing grips are A1 nick but wrong type for my Z1B as they are Z1000 type.
2. Whats the best way to fit new grips.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Bar Grips
Moderators: KeithZ1R, chrisu, paul doran, Taffus
John,
in reverse order,
2, Dunk 'em in warm water & then just slide 'em on
The water will dry out in no time, don't use oil, grease or spray lube 
1, To remove old ones (as long as they ain't glued on), carefully use a flat blade screwdriver & work it in and around until all way down. Whilst doing this a spray of WD40 or Duckoil (other lubrication brands are available
) will ease the operation 
in reverse order,
2, Dunk 'em in warm water & then just slide 'em on
The water will dry out in no time, don't use oil, grease or spray lube
1, To remove old ones (as long as they ain't glued on), carefully use a flat blade screwdriver & work it in and around until all way down. Whilst doing this a spray of WD40 or Duckoil (other lubrication brands are available
) will ease the operation And on the 7th day... Zeds were created!
) dont forget to remove one of the throttle cables from the carb
Who is online
Users browsing this forum: No registered users and 16 guests