Hi, although not a Zed, it's my Yammagamma. The coil that came with it is a 3 ohm green dyna coil and although the bike runs okay ( post complete rebuild) I have been told the correct coil should be 0.33 ohms, what problems will this difference cause. The secondary coil resistance is different also.
Cheers Rob
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Coil query
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Coil query
Z1000R/ZRX, RD 125LC, Zx7r , Endurance racer
http://www.z1ownersclub.co.uk/forum/vie ... light=coil
Hope this helps. i eventually fitted a "new" Dyna coil bought off a member on here and new Taylor leads. The bike is now A1 . I suspect my main problem was a dodgy lead that was sometimes ok and sometimes not with a slightly high resistance coil. But its happy days now with no pops or misfires on damp days
Hope this helps. i eventually fitted a "new" Dyna coil bought off a member on here and new Taylor leads. The bike is now A1 . I suspect my main problem was a dodgy lead that was sometimes ok and sometimes not with a slightly high resistance coil. But its happy days now with no pops or misfires on damp days
Andy
"The greatest trick the devil ever pulled was convincing the world he didnt exist"
"The greatest trick the devil ever pulled was convincing the world he didnt exist"
Hi Andy, that's an interesting thread, I did initially have a problem like yours with it not wanting to run, but it was a new ht lead arching to the head, so I replaced it with a new Taylor lead and that solved that problem.
I really just want to set my mind at rest, using the 3 ohm coil in place of the 0.33 ohm coil.
Rob
I really just want to set my mind at rest, using the 3 ohm coil in place of the 0.33 ohm coil.
Rob
Z1000R/ZRX, RD 125LC, Zx7r , Endurance racer
-
Flying Tiger
- Ted's Biatch
- Posts: 238
- Joined: 11th Jun 2011
- Location: Bury St Edmunds
Hi Rob, Dyna 350 YPVS coil is only 0.7ohm?
Flying Tiger Paintwork - www.facebook.com/FlyingTigerPaintwork - flyingtigerpaintwork@hotmail.co.uk - 07796693751
Hi, the figures I have are off the specification sheets, I haven't actually measured it.
Simon, do you know what colour the dyna coil is, as I will try and get one. I don't really want to mess with the coils because if it burns out the ignition system it will cost me a lot to sort out
Rob
Simon, do you know what colour the dyna coil is, as I will try and get one. I don't really want to mess with the coils because if it burns out the ignition system it will cost me a lot to sort out
Rob
Z1000R/ZRX, RD 125LC, Zx7r , Endurance racer
-
Flying Tiger
- Ted's Biatch
- Posts: 238
- Joined: 11th Jun 2011
- Location: Bury St Edmunds
The Dyna 0.7ohm for YPVS coils are blue, fit earlier RD's too
Flying Tiger Paintwork - www.facebook.com/FlyingTigerPaintwork - flyingtigerpaintwork@hotmail.co.uk - 07796693751
My ex also had a COIL - no damned good coz we ended up with a 3rd child 
Pigford wrote:Just got this page afetr posting the above reply:
Ran into problems sending Mail. Response: 450 4.7.1 Error: too much mail from 92.61.146.171
DEBUG MODE
Line : 143
File : smtp.php
Admin
that will be the quality filter
Keith
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
Who is online
Users browsing this forum: No registered users and 22 guests