Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1000 st headstock bearings

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
nigel bessant
Hardcore
Hardcore
Posts: 1410
Joined: 13th Nov 2009
Location: Salisbury Wiltshire

Z1000 st headstock bearings

#1 PostAuthor: nigel bessant » Sat Sep 29, 2012 5:53 pm

Evening all, can anyone tell me the headstock bearing numbers, both inner and outer for a shaft drive thou?

Thanks
Nigel
Top
User avatar
ADRIAN H
Hardcore
Hardcore
Posts: 4174
Joined: 21st Mar 2009
Location: The Brunswick, Charminster. Bmth

#2 PostAuthor: ADRIAN H » Sat Sep 29, 2012 7:58 pm

z-power list them. part numbers on the pictures 92116-1008, 92116-1009

https://www.z-power.co.uk/merchantmanag ... ts_id=2036
👀 👀 👀
email - adrianhorsfield@live.co.uk
Top
nigel bessant
Hardcore
Hardcore
Posts: 1410
Joined: 13th Nov 2009
Location: Salisbury Wiltshire

#3 PostAuthor: nigel bessant » Sat Sep 29, 2012 8:38 pm

Cheers Adrian
Top
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:
Contact Ginger Bear

#4 PostAuthor: Ginger Bear » Sun Sep 30, 2012 7:29 am

Nigel, Yesterday I fitted a set of 'All Balls' taper berarings that came from Jeff at Z1 Enterprises. Excellent price + they come with dust seal's. :D

http://www.z1enterprises.com/ItemDetail ... =AB22-1009
Image

# 104

Phil Churchett Award Winner 2011 & 2016 :D
Buzzworkz Best Modified Zed 2016
Top
nigel bessant
Hardcore
Hardcore
Posts: 1410
Joined: 13th Nov 2009
Location: Salisbury Wiltshire

#5 PostAuthor: nigel bessant » Sun Sep 30, 2012 12:26 pm

GB, thanks for info, I have discovered that the headstock on the st is different from the standard z1000. The outer bearing diameter is somewhat larger. I am going to have to attempt to source a suitable pair. Probably have to buy a st bottom yoke and start again with the yoke conversion.

:roll:
Top
User avatar
hillbilly
Hardcore
Hardcore
Posts: 2337
Joined: 31st Jan 2008
Location: lancashire

#6 PostAuthor: hillbilly » Sun Sep 30, 2012 12:56 pm

if you know the measurements,try these guys.
http://simplybearings.co.uk/shop/Taper+ ... index.html
push me shuv you.sez who sez me.
owing p.u.m. (76 z1b)(v reg z1r)
Top
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:
Contact Ginger Bear

#7 PostAuthor: Ginger Bear » Sun Sep 30, 2012 4:32 pm

Nigel, I'd agree with Hillbilly, you should find what you need at Simply Bearings. :up
Image



# 104



Phil Churchett Award Winner 2011 & 2016 :D

Buzzworkz Best Modified Zed 2016
Top
nigel bessant
Hardcore
Hardcore
Posts: 1410
Joined: 13th Nov 2009
Location: Salisbury Wiltshire

#8 PostAuthor: nigel bessant » Sun Sep 30, 2012 7:00 pm

Ginger Bear wrote:Nigel, I'd agree with Hillbilly, you should find what you need at Simply Bearings. :up


Yes, I'll them a go. I think I'll give z1 enterprises an email too.

Cheers Brent for the info.

Probably have a set of secondhand bearings going cheap if I can get them out of the headstock without damaging the outer race :(

Thanks again for info

Nigel
Top
User avatar
hillbilly
Hardcore
Hardcore
Posts: 2337
Joined: 31st Jan 2008
Location: lancashire

#9 PostAuthor: hillbilly » Mon Oct 01, 2012 4:09 pm

no probs mate. :wink:
push me shuv you.sez who sez me.

owing p.u.m. (76 z1b)(v reg z1r)
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 12 guests