Can anyone help with information regarding the wiring of the Electronic speedo please.
Cheers Vince
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Wiring
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Measure battery voltage between (white +) and (black/yellow -).
Third wire obviously pulse output to odometer.
Note; it does say to disconnect the three way connector first so i cant see how that would work.
I tested mine and cant remember how i did it but suspect by leaving it connected and pushing the probes into the block.
No you cant take the sensor apart.
All this and all the testing procedure is set out in about five pages in the Kawasaki manual
AL
Third wire obviously pulse output to odometer.
Note; it does say to disconnect the three way connector first so i cant see how that would work.
I tested mine and cant remember how i did it but suspect by leaving it connected and pushing the probes into the block.
No you cant take the sensor apart.
All this and all the testing procedure is set out in about five pages in the Kawasaki manual
AL
1981 J1
Who is online
Users browsing this forum: No registered users and 23 guests