Z1-R bars

stale · #1 PostAuthor: **stale** » Sun May 20, 2007 9:59 pm

Can someone tell me the width of the stock Z1-R D1 handle bars ? I mounted the fairing the other day and the mirror mounts ended up on the inside of the fairing...

There's obviously something wrong. The bars measures 66cm from end to end. cheers

SP10mk11 · #2 PostAuthor: **SP10mk11** » Mon May 21, 2007 6:03 pm

Hi I will measure mine tomorrow and get back to you

Gary

Padders · #3 PostAuthor: **Padders** » Mon May 21, 2007 8:25 pm

My standard bars are 28 1/2 inch's end to end or 72 1/2 cm if you are metric.

padders

stale · #4 PostAuthor: **stale** » Mon May 21, 2007 8:48 pm

Thanks guys. 72.5, eh ? I believe those 6.5cm's is just what I need to get the mirrors on the outside of the fairing. Thanks again. Cheers

stale · #5 PostAuthor: **stale** » Mon May 21, 2007 8:55 pm

Here it is without the fairing. Stock bars with cut ends ? Not stock at all ? Any comments ?

[/img]

Padders · #6 PostAuthor: **Padders** » Tue May 22, 2007 5:52 am

Not stock sorry. The stock ones have a raised section in between the handle bar clamps where the wiring pulls through. I can send a picture if you want.

padders

Ed Z1-R · #7 PostAuthor: **Ed Z1-R** » Tue May 22, 2007 8:16 am

Measuring, following top contours its about 84 cm.

stale · #8 PostAuthor: **stale** » Tue May 22, 2007 4:27 pm

I measured in a straight line between the end of the grips.

Padders, yes a picture would be nice. Thank you. Cheers

Padders · #9 PostAuthor: **Padders** » Tue May 22, 2007 5:32 pm

The 72.5 is straight between the ends of the grips. Here are a couple of pictures hope they help.

stale · #10 PostAuthor: **stale** » Tue May 22, 2007 5:45 pm

Thanks, Padders ! Now, does anyone have some stock bars to spare ? Or does anyone know of a good replacement ? Right height and width. Cheers

Z1-R bars

Z1-R bars

Who is online