Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

z1b float level

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
wallopp
Regular Poster
Posts: 59
Joined: 4th Feb 2007
Location: lincs

z1b float level

#1 PostAuthor: wallopp » Mon Apr 16, 2007 3:32 pm

can any one help me i have a z1b which keeps flooding i have changed float valves and seats i can borrow a tool to measure float height not fuel height but i dont know what it should be ??? thanks steve
Top
User avatar
paul doran
Area Rep.
Area Rep.
Posts: 15910
Joined: 24th Sep 2004
Location: near Dublin Ireland

#2 PostAuthor: paul doran » Tue Apr 17, 2007 5:00 pm

can anyone answer this
way too many Zeds
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#3 PostAuthor: Pigford » Tue Apr 17, 2007 7:59 pm

Most Mikuni carbs are somewhere between 17 - 20mm float height :!: :?:
The Haynes don't say, they only recommend using level gauge.
I'd guesstimate 18mm with float bowl removed, measuring from bowl gasket face (carbs inverted) to bottom of float as it just touches valve.
And on the 7th day... Zeds were created!
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#4 PostAuthor: Pigford » Tue Apr 17, 2007 8:03 pm

PS, If this causes flooding (too much fuel in bowl & too rich) increase this figure a couple of mm. :wink: Hopefully this shouldn't be too far out :?:
And on the 7th day... Zeds were created!
Top
Hobbo
Hardcore
Hardcore
Posts: 2697
Joined: 18th Mar 2006
Location: Hull

float height

#5 PostAuthor: Hobbo » Tue Apr 17, 2007 9:02 pm

HI THERE

Z-POWERS BOOK SAYS 23MM FROM AS PIGFORD SAYS THE GASKET FACE CARBS UPSIDE DOWN

PHIL
Never Dull in Hull Watch no 31
Top
User avatar
Bruce Sexton
Custard Cream
Custard Cream
Posts: 646
Joined: 1st May 2002
Location: Hullbridge, Essex

#6 PostAuthor: Bruce Sexton » Wed Apr 18, 2007 12:42 pm

I'd agree with the 23mm. I've always used this measurement with no problems :)
Why were Z1A's not Blue???????
Top
wallopp
Regular Poster
Posts: 59
Joined: 4th Feb 2007
Location: lincs

z1b float level

#7 PostAuthor: wallopp » Thu Apr 19, 2007 3:32 pm

Thanks a lot guys i'll try that and see how it go's thanks
Top
User avatar
Bruce Sexton
Custard Cream
Custard Cream
Posts: 646
Joined: 1st May 2002
Location: Hullbridge, Essex

#8 PostAuthor: Bruce Sexton » Mon Apr 23, 2007 12:24 pm

This months CMM has a bit on setting float heights.

Bruce
Why were Z1A's not Blue???????
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 12 guests