I just need some basic Z1000 info please, as I don't have a service manual at this time, I am sure the info is on this site somewhere but I can't find it.
Which Denso plugs.
Plug gap size.
Tyre pressures.
and do you need to re-jet to use pod filters?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Just some basic info please
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
london calling
- Hardcore
- Posts: 3992
- Joined: 16th Apr 2004
- Location: Loughborough, East Midlands
If its a 4-1 as well as hi-flo filters, this can lean things out a tad more, but I'd still think 10% increase should be a good starting point 
The 4-1 should be less restrictive, so in theory, allow more mixture to flow, therefore an increase in fuel & air must be catered for
The 4-1 should be less restrictive, so in theory, allow more mixture to flow, therefore an increase in fuel & air must be catered for
And on the 7th day... Zeds were created!
Who is online
Users browsing this forum: No registered users and 7 guests