gpz1100 a2 discs

[marve114]

hi all has any one got a set of these discs
i mainly after the front at the moment but cannot be no larger that 170mm
as im using the wheels for my z1000j

but most of all i dont want to pay the earth for them as im a poor student

let me know cheers
lee

[marve114]

i think gpz750 a2 discs are the same

[london calling]

GP ZX 1100 front discs are 280mm diameter,so are 750 TURBO.
The GP ZX750 uni-trak front discs are 270mm diameter.
These discs are a 6 bolt mounting,wheres the 1000J,etc are 7 bolt fixing.
I might have some 270mm discs,I'll check on saturday and let you know.

[marve114]

im putting gpz1100 wheels on my j3as they go straight in so i would need some gpz750 discs by the sounds of it
cheers

london calling

[london calling]

The J3 runs 280mm discs as standard,same as the 1000R2 Lawson and GPz1100B2.
The J1/J2 run 270mm front discs.
The fork bottoms on the J3/R2/B2 are slightly different and has the lower caliper mount offset to allow for the larger disc.

[marve114]

hmmm will have to drop the wheel out now and make sure of the size

[Pigford]

You don't have to take the wheel out to measure the disc diameter....

[marve114]

checked my discs they are to small at 270mm
i removed the caliper to find this !



280mm needed please

[steve.w]

i may have soom mate if u still need some ill have a look tmmrw steve

[marve114]

yeah im still after a set of discs must be off a gpz1100 a1-a3
6 bolt fitting and diameter of 280mm
let me know

land_rover4x4@hotmail.com

07515553478
lee

[marve114]

any one know if these will fit ?
http://cgi.ebay.co.uk/Kawasaki-GPZ1000R ... 45eedceec5

[london calling]

Yes they will

[marve114]

hope your right lol

[london calling]

Just check that the PCD is the same as your existing disc/wheel.

[steve.w]

hi mate ive got a good pair steve