Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
z1000a1 Start of the uphill struggle !
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
ade woollams
- Custard Cream
- Posts: 505
- Joined: 5th Mar 2007
- Location: within the smoke n the burnout zone
i bet its got a yellow back axle with a fog light under there to light it up as well.
dragracing, because it takes more than one ball !!!!!!!!!!!!!!!
http://www.youtube.com/watch?v=pNoktjNP ... ture=share
http://www.youtube.com/watch?v=pNoktjNP ... ture=share
-
paul doran
- Area Rep.
- Posts: 15910
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
-
tm53chev
proper build
in order to do a proper build you need a frame off disassembly or buy it already disassembled if you want a challange
-
Rob Lafferty
- Regular Poster
- Posts: 87
- Joined: 6th Sep 2009
- Location: Basingstoke, Hampshire
Thought it was time to update the project listing.
Project seems to be going backwards as things are still in the process of being dismantled, which has been a bit slow due to the weather and lack of garage space.
Some parts are are with RD Cox for cleaning and hope to be getting them back next week, when i will drop of more.
Engine has been dismantled with only a coulpe of screwhat have caused major problems. Two screws in the primary drive cover would not undo and had to be drilled. Still need to sort this out before all the engine bits go off for cleaning.
Carbs are away being ultrasonically cleaned and then vapour blasted by keefleaf.
Project seems to be going backwards as things are still in the process of being dismantled, which has been a bit slow due to the weather and lack of garage space.
Some parts are are with RD Cox for cleaning and hope to be getting them back next week, when i will drop of more.
Engine has been dismantled with only a coulpe of screwhat have caused major problems. Two screws in the primary drive cover would not undo and had to be drilled. Still need to sort this out before all the engine bits go off for cleaning.
Carbs are away being ultrasonically cleaned and then vapour blasted by keefleaf.
Last edited by Rob Lafferty on Sun Jan 24, 2010 8:47 pm, edited 1 time in total.
-
Rob Lafferty
- Regular Poster
- Posts: 87
- Joined: 6th Sep 2009
- Location: Basingstoke, Hampshire
-
Rob Lafferty
- Regular Poster
- Posts: 87
- Joined: 6th Sep 2009
- Location: Basingstoke, Hampshire
-
Rob Lafferty
- Regular Poster
- Posts: 87
- Joined: 6th Sep 2009
- Location: Basingstoke, Hampshire
-
Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Who is online
Users browsing this forum: No registered users and 7 guests