Dette blir nok bra
Hilsen Jan Petter
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Harris magnum Z1100R
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
paul doran
- Area Rep.
- Posts: 15910
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
Back from South London
Right! Thanks for all the support lads. Got my head back and I'm really pleased. All cleaned up and the crack is welded with new thread etc.
John at I KLEENZ MACHEENZ (daft name) is a top bloke. He is dedicated and really tries to accommodate is customers. Total cost for the welding and cleaning of rotten ol head and cam cover was £150, which I reckon is good value. If only he did human heads! Degreased and vapour blasted with optional finish (ready for paint or just ready). I've decided not to paint it.
John at I KLEENZ MACHEENZ (daft name) is a top bloke. He is dedicated and really tries to accommodate is customers. Total cost for the welding and cleaning of rotten ol head and cam cover was £150, which I reckon is good value. If only he did human heads! Degreased and vapour blasted with optional finish (ready for paint or just ready). I've decided not to paint it.
Never heard of a Harris Magnum
zorded wrote:Rod does the cam lobe clear the head where its been welded. they're pretty close there with GP cams in??
Just a thought before you assemble it.
AL
That's a good point Zorded, I will give that special attention on re-assembly. Might have to get the Dremel out!
Thanks,
Rod
Never heard of a Harris Magnum
-
Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
That's a nice looking Magnum you have there Rod, and I'm keen to see the end result.
I could never get on with Magnums, as they spent far too much time on the back wheel due to the ridiculously short (14") and steep raked swing arm.
In the 80's the alternative Moto Martin's allowed you to get on with 'the business' whilst the Harris's just spent their time being hooligans wheelying everywhere.
The swing arm in yours looks much longer than a conventional Magnum 2 offering though... Is that a Magnum 3 arm or a special from Harris ?
Keep up the good work, it's gonna look real good.
Will
I could never get on with Magnums, as they spent far too much time on the back wheel due to the ridiculously short (14") and steep raked swing arm.
In the 80's the alternative Moto Martin's allowed you to get on with 'the business' whilst the Harris's just spent their time being hooligans wheelying everywhere.
The swing arm in yours looks much longer than a conventional Magnum 2 offering though... Is that a Magnum 3 arm or a special from Harris ?
Keep up the good work, it's gonna look real good.
Will
Kawasaki H2C 750, ZRX1100R, H**** VF1000RG Rothmans, H**** VF500F2F, Suzuki GSXR750F Slabbie
Hi Will,
Thanks for the comments. This is the fourth rebuild for Esmerelda. She's had all kinds of different paint and running gear etc. It's not actually a rebuild, I cracked the head and had to get it welded. Which meant a clean up an all that.
The swingarm was made by Polygon to enable the wider rim. They also did the yokes and some other bits and pieces.
Not much spare time at the moment, so it's going to be a while. Also, now I've cleaned up the top end, the rest of the motor looks even crappier!
Cheers,
Rod
Thanks for the comments. This is the fourth rebuild for Esmerelda. She's had all kinds of different paint and running gear etc. It's not actually a rebuild, I cracked the head and had to get it welded. Which meant a clean up an all that.
The swingarm was made by Polygon to enable the wider rim. They also did the yokes and some other bits and pieces.
Not much spare time at the moment, so it's going to be a while. Also, now I've cleaned up the top end, the rest of the motor looks even crappier!
Cheers,
Rod
Never heard of a Harris Magnum
-
paul doran
- Area Rep.
- Posts: 15910
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
Who is online
Users browsing this forum: No registered users and 10 guests