is that correct? as the fittings for the hjoses to clamp to the cooler available?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
H**** oil cooler question
Moderators: KeithZ1R, chrisu, paul doran, Taffus
H**** oil cooler question
.... see photo ... looks like the fittings are cricular ends that bolt on using two bolts onto the cooler, an o-ring making the seal.
is that correct? as the fittings for the hjoses to clamp to the cooler available?
is that correct? as the fittings for the hjoses to clamp to the cooler available?
Basically yes, they are flanged to match the cooler with two bolt holes, the tube does extend in to the cooler fittings slightly to positively locate the o-ring.
Have a look for the hoses as well, the hose is usually swaged on and can be removed and replaced with the careful use of a hacksaw.
Have a look for the hoses as well, the hose is usually swaged on and can be removed and replaced with the careful use of a hacksaw.
Rich
diplomacy is a form of art - I was never any good at art
diplomacy is a form of art - I was never any good at art
Who is online
Users browsing this forum: No registered users and 19 guests