Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

early z1 switch assembly

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

early z1 switch assembly

#1 PostAuthor: mick znone » Mon Jun 29, 2009 9:39 pm

ive just bought a z1a right hand switch block off ebay. it has no buttons or switches on it. do the buttons and switches off the z1b fit straight on :?:
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
User avatar
C Martin
100Club
100Club
Posts: 247
Joined: 7th May 2009
Location: Melton Mowbray

#2 PostAuthor: C Martin » Mon Jun 29, 2009 10:25 pm

Yes they fit, i used a new pattern Z1B switch removed the switch casings and fitted the switches and wiring in to my Z1 casings, but you have to un- solder and re-solder the kill switch


Chris
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#3 PostAuthor: mick znone » Tue Jun 30, 2009 6:41 am

thats great, thanks Chris, very pleased about that, just bought an empty early switch block for £10 on ebay, DEAL :brav
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#4 PostAuthor: Garn 1 » Wed Jul 01, 2009 11:59 am

Don't be too fast in fitting Z1B "guts" into the Z1/early Z1A handle-bar control switches. I have an idea you get caught with the starter button fibre contact plate, as well as the solder joints as mentioned above.... Let's know how you go? I will be interested to know, as I have a few early RHS switches in need of innings (guts).
RegardZ
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#5 PostAuthor: Garn 1 » Wed Jul 15, 2009 9:41 pm

MickZ1A & C Martin, before this thread disappears into oblivion...
Have you confirmed that the right-hand side, new patterned Z1B innings will fit into early Z1 switch-block cases. I understand there is soldering and re-soldering involved. As mentioned before, I'm concerned about that starter button.
Any further comment(s) would be appreciated.
RegardZ
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#6 PostAuthor: mick znone » Thu Jul 16, 2009 1:08 pm

hi Garn, i have the outer casing now and am going to check it all over next week, if you can wait till then, i will bring this thread up, updating on the progress,
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#7 PostAuthor: Garn 1 » Fri Aug 07, 2009 7:53 am

Maybe, I will pose an answer to my queries..., I know you guys are busy.
Let me say, I don't think you can interchange a Z1B RHS h'bar switch into a Z1 RHS switch cases! Correct me if you have an answer!
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#8 PostAuthor: mick znone » Fri Aug 07, 2009 8:08 am

sorry Garn, i havent been in a zed frame of mind for a while, bit like Monk, fell out of love with it after it let me down a bit. now i have a van, ive just popped it back in the barn. i need to reaquaint myself with the Z. :rake
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#9 PostAuthor: mick znone » Sat Aug 22, 2009 9:01 am

ok Garn, im oredering a set of repro z1b switches from zpower, im going to give it a go this week, will post the out come.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#10 PostAuthor: Garn 1 » Mon Aug 24, 2009 11:30 am

Thank's Mick, I knew you wouldn't forget!
RegardZ ~ Garn
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#11 PostAuthor: mick znone » Mon Aug 24, 2009 6:18 pm

just waiting for the switches from zpower, no zed to try it on now, just doing it out of curiosity :??
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#12 PostAuthor: Pigford » Mon Aug 24, 2009 6:42 pm

Mick, I thought you'd sold your Zed :?: :??
And on the 7th day... Zeds were created!
Top
User avatar
AL MARSHALL
100Club
100Club
Posts: 369
Joined: 13th Feb 2007
Location: BURTON ON TRENT/ TAMWORTH

switch

#13 PostAuthor: AL MARSHALL » Mon Aug 24, 2009 6:48 pm

hi mick,would you consider selling me the early switch.with or without your experiment.i would also buy the zpower switches from you. pm me if you are interested :D
trouble.......seek and ye shall find
www.z-clocks.co.uk
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#14 PostAuthor: Garn 1 » Wed Aug 26, 2009 5:27 pm

This has been continued under heading "Z1b innereds into Z1 cases" .....
Thanks Mick Z1A.
RegardZ
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 23 guests