Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Fitting electronic ignition

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Richardz900

Fitting electronic ignition

#1 PostAuthor: Richardz900 » Thu Jan 01, 2009 4:22 pm

The HT lead has broken where it enters the coil on my z900 A4, i'v now decided to fit a Boyer Bransden Micro-Power CDI which includes new coils which i'll be ordering from z-power. Has anyone got any advice as to how to fit this myself? Or should it be taken to a garage to be done? I have basic knowledge and don't want to start the job if I cant finish it. Any tips will be appreciated.
Cheers :)
Top
wilsonsjw11
Hardcore
Hardcore
Posts: 1317
Joined: 18th Jul 2008
Location: West Sussex/Central London

#2 PostAuthor: wilsonsjw11 » Thu Jan 01, 2009 4:56 pm

Richard.
Just fitted a Dyna S system and 3 ohm coils to my Z1B,easy to follow instructions,can't go wrong,just make sure you fit some heat shrink tubing to the mounting bolts/spacers so LT side does not short to earth,pm me if you need some heat shrink tubing
Best Regards
Steve
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

Re: Fitting electronic ignition

#3 PostAuthor: Pigford » Thu Jan 01, 2009 4:59 pm

Richardz900 wrote:The HT lead has broken where it enters the coil on my z900 A4, i'v now decided to fit a Boyer Bransden Micro-Power CDI which includes new coils which i'll be ordering from z-power. Has anyone got any advice as to how to fit this myself? Or should it be taken to a garage to be done? I have basic knowledge and don't want to start the job if I cant finish it. Any tips will be appreciated.
Cheers :)


The general consensus on here is go DYNA everytime.... :??

I got a new DYNA S ignition for grabs.... :wink:

Boyer Branstonpickle systems don't seem to be too robust... :cry:
And on the 7th day... Zeds were created!
Top
FER
Auld Heedyun
Posts: 840
Joined: 10th Jan 2002
Location: Glenfoot

#4 PostAuthor: FER » Thu Jan 01, 2009 5:01 pm

Do not buy the Boyer system . Dyna everytime .





fer
Top
wilsonsjw11
Hardcore
Hardcore
Posts: 1317
Joined: 18th Jul 2008
Location: West Sussex/Central London

#5 PostAuthor: wilsonsjw11 » Thu Jan 01, 2009 5:02 pm

Mark
Can I be your marketing/promotions manager
Regards
Steve
Happy new year!!!!
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#6 PostAuthor: Pigford » Thu Jan 01, 2009 5:03 pm

wilsonsjw11 wrote:Mark
Can I be your marketing/promotions manager
Regards
Steve
Happy new year!!!!



Whats you % cut :?:
And on the 7th day... Zeds were created!
Top
User avatar
london calling
Hardcore
Hardcore
Posts: 3992
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

#7 PostAuthor: london calling » Thu Jan 01, 2009 5:03 pm

Piggy,I thought you had a Brand New Combine Harvester :lol: :lol:
Jack
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#8 PostAuthor: Pigford » Thu Jan 01, 2009 5:05 pm

london calling wrote:Piggy,I thought you had a Brand New Combine Harvester :lol: :lol:



Jack-M-Lad..... But I won't give you the key :!:
And on the 7th day... Zeds were created!
Top
User avatar
london calling
Hardcore
Hardcore
Posts: 3992
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

#9 PostAuthor: london calling » Thu Jan 01, 2009 5:08 pm

Touche :wink:
Jack
Top
Rich
Hardcore
Hardcore
Posts: 2835
Joined: 4th Mar 2003

#10 PostAuthor: Rich » Thu Jan 01, 2009 5:31 pm

If you can set points up it should be no problem for you to put elec ignition on. You will need a strobe and a basic idea of wiring would be an advantage.
Rich
 diplomacy is a form of art - I was never any good at art
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#11 PostAuthor: Pigford » Thu Jan 01, 2009 5:36 pm

Intial set up, don't even need a strobe..... Manually hold on 'full advance' & check marks.... won't be too far out :wink:
And on the 7th day... Zeds were created!
Top
Richardz900

#12 PostAuthor: Richardz900 » Thu Jan 01, 2009 6:25 pm

hi pigford, is the dyna s compleat with coils, if not what coils would i need. what u want for it. thanks for advice, regards & happy new year . richard.
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#13 PostAuthor: Pigford » Thu Jan 01, 2009 6:30 pm

Richard....... sorry but I've been pm'd by a member who's just bought it off me...... :oops:

But Dyna S can be used with standard coils no probs... or Dyna Coils... 2.2 or 3.0 ohms :wink:
And on the 7th day... Zeds were created!
Top
Richardz900

#14 PostAuthor: Richardz900 » Thu Jan 01, 2009 6:36 pm

wilsonsjw11 wrote:Richard.
Just fitted a Dyna S system and 3 ohm coils to my Z1B,easy to follow instructions,can't go wrong,just make sure you fit some heat shrink tubing to the mounting bolts/spacers so LT side does not short to earth,pm me if you need some heat shrink tubing
Best Regards
Steve

thanks for advice steve. got some tubing but thanks, will fit it myself :?? regards & happy new year richard
Top
Richardz900

#15 PostAuthor: Richardz900 » Thu Jan 01, 2009 7:00 pm

thanks to all for advice, :D dyna s its got to be. happy new year to all, richard.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 18 guests