Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Neutral Switch Query

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Tonto
Custard Cream
Custard Cream
Posts: 629
Joined: 11th Jan 2012
Location: Lincoln - The Land That Time Forgot

Neutral Switch Query

#1 PostAuthor: Tonto » Tue Jul 28, 2015 4:09 pm

Chaps - neutral light failed last week, changed bulb and no joy so took a look at the neutral switch and it was dangling in the breeze.

Image

Problem is I cant seem to re-attach it and nothing in my service maual shows any detail of how it fit into the retainer. Have I lost a compnent that it should locate into ??

Any advice appreciated - Cheers Tim
"Better to remain silent and be thought an idiot, than to open your mouth and remove any doubt" - Abraham Lincoln
Z900 A4 / KZ1300A1 / H1F 500 Project / CBX Project / RD350 project / GT750A Kettle / BMW R NineT
Top
User avatar
KeithZ1R
Moderator
Posts: 3368
Joined: 15th May 2005
Location: Bury

#2 PostAuthor: KeithZ1R » Tue Jul 28, 2015 4:16 pm

its snapped off, you need to remove the broken threaded bit and replace the whole thing
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
User avatar
Z1parR
Hardcore
Hardcore
Posts: 4901
Joined: 11th Oct 2009
Location: Chorley Lancs

#3 PostAuthor: Z1parR » Tue Jul 28, 2015 4:20 pm

It's knackered Tim :wink:

The switch body has cracked through and the guts have fallen out .

A flat bladed screwdriver will undo the threaded portion of the body from the motor .

A new switch then will sort it :(
0172 . Geoff Parr
Top
User avatar
Z1parR
Hardcore
Hardcore
Posts: 4901
Joined: 11th Oct 2009
Location: Chorley Lancs

#4 PostAuthor: Z1parR » Tue Jul 28, 2015 4:21 pm

Wot Keith just said :oops:
0172 . Geoff Parr
Top
User avatar
Tonto
Custard Cream
Custard Cream
Posts: 629
Joined: 11th Jan 2012
Location: Lincoln - The Land That Time Forgot

#5 PostAuthor: Tonto » Tue Jul 28, 2015 6:01 pm

Guys thanks, I hadn't realised it had snapped in two :oops: .
I mistakenly thought the yellow hex top screwed into the main body -- doh !
I'll order a replacement from Z-Power tomorrow

Cheers Tim
"Better to remain silent and be thought an idiot, than to open your mouth and remove any doubt" - Abraham Lincoln

Z900 A4 / KZ1300A1 / H1F 500 Project / CBX Project / RD350 project / GT750A Kettle / BMW R NineT
Top
wilsonsjw11
Hardcore
Hardcore
Posts: 1317
Joined: 18th Jul 2008
Location: West Sussex/Central London

#6 PostAuthor: wilsonsjw11 » Wed Jul 29, 2015 6:06 am

Tim,
The plastic item is now NLA.
You will get a steel item as the replacement part that comes with a push on connector rather than the screw terminal.
Regards
Steve
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 13 guests