Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

wheels and charging

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
royboy
Regular Poster
Posts: 75
Joined: 1st Jan 2013
Location: west london

wheels and charging

#1 PostAuthor: royboy » Sat Aug 17, 2013 12:52 pm

hi all
do you know if the z650 wheels will fit the z900 A4,+ bike was charging
14.6v across battery now only 12 to 13.2v,tried to check the 3 yellow wires from stator but getting 18.2 on all 3 wires am I doing some thing wrong.
when running with lights on they are dim and when revving up the lights get bright.asking because battery goes flat { new battery }would flat battery
cause missing at low rpm.
thanks royboy.
Top
User avatar
000zeds
ZedHead
ZedHead
Posts: 1129
Joined: 30th Dec 2005
Location: Kent

#2 PostAuthor: 000zeds » Sat Aug 17, 2013 2:28 pm

Front wheels are the same but not sure about rear :!:
Zeds-R-Us
Top
User avatar
Jay1969
Hardcore
Hardcore
Posts: 4260
Joined: 26th Feb 2013
Location: East Midlands, England.
Contact:
Contact Jay1969

#3 PostAuthor: Jay1969 » Sat Aug 17, 2013 2:52 pm

Battery problem would be your regulator/rectifier unit.
Top
User avatar
Charlie
Custard Cream
Custard Cream
Posts: 773
Joined: 11th Jun 2011
Location: Sheffield
Contact:
Contact Charlie

#4 PostAuthor: Charlie » Sat Aug 17, 2013 3:25 pm

The axle is smaller on the rear of a Z650. It's 17mm as opposed to the Z900's 20mm so you would have wheel bearing issues at least.
Why do I persist in debating with idiots ? I really should know better :)
Top
royboy
Regular Poster
Posts: 75
Joined: 1st Jan 2013
Location: west london

wheels

#5 PostAuthor: royboy » Sun Aug 18, 2013 10:03 am

thanks all will try new reg/rec,and not the wheels
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#6 PostAuthor: z1bman » Sun Aug 18, 2013 10:35 am

z650 front + rear wheel axle size's are identical to the z 900
Top
User avatar
Charlie
Custard Cream
Custard Cream
Posts: 773
Joined: 11th Jun 2011
Location: Sheffield
Contact:
Contact Charlie

#7 PostAuthor: Charlie » Sun Aug 18, 2013 12:12 pm

Z650 rear spindles are only 17mm. I have one on my bench. Z900's use 20mm rear spindles...

Image
Why do I persist in debating with idiots ? I really should know better :)
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 24 guests