Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Desperate to identify these !!!

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
bigmac103
100Club
100Club
Posts: 489
Joined: 17th Sep 2008
Location: Abu Dhabi

#16 PostAuthor: bigmac103 » Sun Apr 12, 2009 9:03 pm

They're identical to the 26mm that are on my Z900A4! apart from the idle adjuster being on top on mine.
Lost in the desert somewhere
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#17 PostAuthor: zed1015 » Sun Apr 12, 2009 9:51 pm

I have sets from both z1r and 1000a .Both are identical externally as yours with idle adjuster underneath but z1r's are 28mm and 1000a are 26mm. I also have sets from gs1000 which are basically the same mikunis but have provision for idle adjuster on top and cable operated choke. Jetting sounds about right. Std Z1R 28mm has 112.5 mains and 17.5 pilots. So yours are probably 1000a 26's . As long as it runs ok why worry.
Top
Rich
Hardcore
Hardcore
Posts: 2835
Joined: 4th Mar 2003

#18 PostAuthor: Rich » Mon Apr 13, 2009 7:53 am

Most likely 28s from a Z1000 D1 / A3 / A4. Take them off and measure them as said Suzuki had cable chokes.
Rich
 diplomacy is a form of art - I was never any good at art
Top
User avatar
Dodgy Z1B
100Club
100Club
Posts: 401
Joined: 18th Apr 2007
Location: Renfrewshire, Scotland
Contact:
Contact Dodgy Z1B

#19 PostAuthor: Dodgy Z1B » Mon Apr 13, 2009 8:35 am

If they are suzuki just to ad to the debate gs750 didn't have a cable choke and looked very similar, is ther not any serial numbers etc on them.
Image
Top
User avatar
compo z1r
ZedHead
ZedHead
Posts: 1055
Joined: 25th Sep 2008
Location: SQUIRES NORTH YORKS
Contact:
Contact compo z1r

carbs

#20 PostAuthor: compo z1r » Mon Apr 13, 2009 8:45 am

defo 28.mm z1r carbs :roll: :roll:
THE ORIGINAL TARMAC TERRORIST

Z1000S !! Z1R Z810 [ project ] FZR 1000 RU KTM SXF 250 / 08 R6 and my dog zak.???

Z1OC # 886
Top
User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1729
Joined: 1st Sep 2007
Location: Leicestershire

#21 PostAuthor: KWACKERZ1 » Tue Apr 14, 2009 10:25 am

Z1000A1/2 hAD THE ADJSUETR AT THE TOP 28MM Z1R OR SIMILIAR JUST TAKE THEM OFF A MEASURE THEM THEY i WOULD BET THEY ARE 28MM.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 11 guests