Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

GS1000S

Work in Progress

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
davy thomson
ZedHead
ZedHead
Posts: 1000
Joined: 24th Aug 2005
Location: scotland [north]

#91 PostAuthor: davy thomson » Sat Aug 15, 2009 3:31 pm

Image
1000 posts reached that will do for me,over and out.been fun.
Top
davy thomson
ZedHead
ZedHead
Posts: 1000
Joined: 24th Aug 2005
Location: scotland [north]

#92 PostAuthor: davy thomson » Sat Aug 15, 2009 3:32 pm

Image
Progress so far-engine in back end on. front end sorted clocks on hope to have it sitting on its wheels tomorrow. :D
1000 posts reached that will do for me,over and out.been fun.
Top
davy thomson
ZedHead
ZedHead
Posts: 1000
Joined: 24th Aug 2005
Location: scotland [north]

#93 PostAuthor: davy thomson » Mon Aug 17, 2009 9:27 pm

Image

Front end getting busy just need brakes and lines.
1000 posts reached that will do for me,over and out.been fun.
Top
davy thomson
ZedHead
ZedHead
Posts: 1000
Joined: 24th Aug 2005
Location: scotland [north]

#94 PostAuthor: davy thomson » Mon Aug 17, 2009 9:34 pm

Image

Not a bad weekends work hope my new harness will be here for next weekend,found a good source for gs parts over in Holland and they are very reasonable. :lol:
1000 posts reached that will do for me,over and out.been fun.
Top
User avatar
mikey
Hardcore
Hardcore
Posts: 3792
Joined: 29th Nov 2005
Location: bristol

#95 PostAuthor: mikey » Tue Aug 18, 2009 3:18 pm

Looking good davy keep it going mate
Making the world a shiny place with a factory finish
Top
Thezedsintheshed
100Club
100Club
Posts: 160
Joined: 22nd Sep 2007
Location: Deepest Darkest Wales

#96 PostAuthor: Thezedsintheshed » Tue Aug 18, 2009 9:17 pm

Cracking thread !! nice to see another GS going back together and back on the road.
I have always run a GS thou as daily transport along side the Zeds since 79 / 80.
Hate to have to admit it but the GS motor is way stronger than the Zed for rally high mileage and ease of maintainance :oops:

Somewhere here amoungst the junk I have got a full size silk GS1000 advertizing flag which got " liberated " :wink: from the Heron Suzuki stand at the bike show in 1979 I will dig it out and post a photo of it .
It's not broke , just in bit's for a while !
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#97 PostAuthor: Pigford » Tue Aug 18, 2009 9:25 pm

Thezedsintheshed wrote:Somewhere here amoungst the junk I have got a full size silk GS1000 advertizing flag which got " liberated " :wink: from the Heron Suzuki stand at the bike show in 1979 I will dig it out and post a photo of it .


I got second best - GS850 large 'table cloth'... :oops:
And on the 7th day... Zeds were created!
Top
Thezedsintheshed
100Club
100Club
Posts: 160
Joined: 22nd Sep 2007
Location: Deepest Darkest Wales

#98 PostAuthor: Thezedsintheshed » Tue Aug 18, 2009 9:53 pm

Ahh the good old days , bike shows just aint the same these days :lol:
try the same stunt these days and we would probably land up with 5 years inside instead of a few freebies :shock:

It was one of the unwritten rules at shows back in those days, come the end of the show on all of the factory stands the only thing absolutly off limits were the bikes as for everything else if it wasnt bolted down then it was away :roll:
It's not broke , just in bit's for a while !
Top
davy thomson
ZedHead
ZedHead
Posts: 1000
Joined: 24th Aug 2005
Location: scotland [north]

#99 PostAuthor: davy thomson » Sun Aug 30, 2009 6:53 pm

Image GS on its stand first time in ten years.
1000 posts reached that will do for me,over and out.been fun.
Top
davy thomson
ZedHead
ZedHead
Posts: 1000
Joined: 24th Aug 2005
Location: scotland [north]

#100 PostAuthor: davy thomson » Sun Aug 30, 2009 6:58 pm

ImageClocks on,new controls fitted etc.
1000 posts reached that will do for me,over and out.been fun.
Top
davy thomson
ZedHead
ZedHead
Posts: 1000
Joined: 24th Aug 2005
Location: scotland [north]

#101 PostAuthor: davy thomson » Sun Aug 30, 2009 7:03 pm

Image
Rear wheel to go in tomorrow, got a set of new pegs from the states $25 absolute bargain. :lol:
1000 posts reached that will do for me,over and out.been fun.
Top
davy thomson
ZedHead
ZedHead
Posts: 1000
Joined: 24th Aug 2005
Location: scotland [north]

#102 PostAuthor: davy thomson » Mon Aug 31, 2009 6:00 am

Hi zedintheshed would you like to be liberated from that banner ? Is it the one with the early light blue model on it.
1000 posts reached that will do for me,over and out.been fun.
Top
RGH
100Club
100Club
Posts: 453
Joined: 16th May 2009
Location: Mandurah Western Australia

#103 PostAuthor: RGH » Mon Aug 31, 2009 2:47 pm


Rear wheel to go in tomorrow, got a set of new pegs from the states $25 absolute bargain


Davy, I don't know how, luck seems to roll your way every f#####g time.

Take a video of initial start up, whack it on youtube!!!!!!!!
Top
Thezedsintheshed
100Club
100Club
Posts: 160
Joined: 22nd Sep 2007
Location: Deepest Darkest Wales

#104 PostAuthor: Thezedsintheshed » Mon Aug 31, 2009 4:34 pm

Hi Davy
It is the banner with the light blue GS1000
unfortunatly I cant part with it because it has already been promised to my son as and when I pop my clogs :shock:

Image
It's not broke , just in bit's for a while !
Top
User avatar
Davy Doherty
Hardcore
Hardcore
Posts: 3009
Joined: 28th Oct 2003
Location: Derry Ireland

#105 PostAuthor: Davy Doherty » Mon Aug 31, 2009 4:49 pm

Jezz what a waste of good time restoring that heap,, it'll still look like fuck all when your finished, You should have kept the Z1A and saved your money..
Life's too short!
Top
Post Reply

Return to “Projects”

Who is online

Users browsing this forum: No registered users and 3 guests