Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Steering Damper

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Z1000ELR

Steering Damper

#1 PostAuthor: Z1000ELR » Mon Aug 03, 2009 6:29 pm

Right chaps just bought this: http://www.busters-accessories.co.uk/pr ... saki-Style
Thinking it would bolt straight on...it doesnt!! I have a mark 2 or Z1R frame. Anybody help with how i fit it please??

Cheers
Si
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#2 PostAuthor: tlc » Mon Aug 03, 2009 6:32 pm

What size are your forks ?

I have a clamp assembly.
Asphalt Cowboy

Phil Churchett award winner 2015
Top
Z1000ELR

#3 PostAuthor: Z1000ELR » Mon Aug 03, 2009 6:40 pm

Ill check and let you know mate. Thanks
Top
Z1000ELR

#4 PostAuthor: Z1000ELR » Mon Aug 03, 2009 6:44 pm

Tailift,
38mm mate

Si
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#5 PostAuthor: tlc » Mon Aug 03, 2009 8:13 pm

37.6mm :D

Image
Asphalt Cowboy



Phil Churchett award winner 2015
Top
Z1000ELR

#6 PostAuthor: Z1000ELR » Mon Aug 03, 2009 9:29 pm

Smarty pants!!!
You have a PM mate
Top
Z1000ELR

#7 PostAuthor: Z1000ELR » Wed Aug 05, 2009 3:45 pm

Right then,
Fork clamp sorted, still have to attach it at the frame end!
Can anybody help please?

Thanks
Si
Top
User avatar
Gus
ZedHead
ZedHead
Posts: 1119
Joined: 17th Mar 2007
Location: Gloucestershire

#8 PostAuthor: Gus » Wed Aug 05, 2009 4:03 pm

Isn't it supposed to connect between the front down tube angle bracket and the bottom yoke?
"Set the GRINDER on it"
Top
Z1000ELR

#9 PostAuthor: Z1000ELR » Wed Aug 05, 2009 4:10 pm

Gus
But where to attach it mate (frame end)
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#10 PostAuthor: Pigford » Wed Aug 05, 2009 5:38 pm

If there is no hole on the lower headstock area (often r/h side) you'll have to find a suitable place, that allows full left-right stroke of the damper... Then drill holes to fix a suitable bracket :wink:
Last edited by Pigford on Wed Aug 05, 2009 9:37 pm, edited 1 time in total.
And on the 7th day... Zeds were created!
Top
User avatar
Al
Hardcore
Hardcore
Posts: 2233
Joined: 21st Oct 2007
Location: Farnbronx Sin City N.E. Hants

#11 PostAuthor: Al » Wed Aug 05, 2009 7:43 pm

Just to give you a very rough idea of what may be required, this is the Damper assy from the 'J' with its brackets and other bits attached.


Image


This is where it was fitted on the right H/S before i took it off.
There are two captive nuts on the frame gusset plate on mine but dont know if they are original as the damper was fitted when i got the bike.
The arc of the damper rod ran very very close to the cam cover if i remember and the damper body is not that far from the tank.
Quite a difficult juggling act for the previous owner but it was managed. Just!!


Image


AL
Top
Z1000ELR

#12 PostAuthor: Z1000ELR » Wed Aug 05, 2009 7:48 pm

Al,
Thats the one. Its the small oval bracket i need to get then. Any ideas where?
If not ill get one made

Si
Top
User avatar
Al
Hardcore
Hardcore
Posts: 2233
Joined: 21st Oct 2007
Location: Farnbronx Sin City N.E. Hants

#13 PostAuthor: Al » Wed Aug 05, 2009 7:58 pm

Its the small oval bracket i need to get then. Any ideas where?


Not really just now except the wants section.

I can bring it with me on Saturday and you could get it copied if its exactly the same as you need which i cant guarantee.

AL
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 15 guests