Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Points cam

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
ted1r
Area Rep.
Area Rep.
Posts: 2907
Joined: 29th May 2008
Location: Cleethorpes Lincolnshire

Points cam

#1 PostAuthor: ted1r » Tue Jul 28, 2009 6:49 pm

Does the team think :?: that the heel of the points arm should be just touching the rotor or should there be a gap, I am at a loose end with my timing.

Ted
"Work this is why I did it"

"I've had more minutes than I have left"

Z1R D1
Granada
vantastic Transit........
KLE650
Top
User avatar
BShaw
Area Rep.
Area Rep.
Posts: 714
Joined: 22nd Dec 2001
Location: Westgate on sea

#2 PostAuthor: BShaw » Tue Jul 28, 2009 7:33 pm

I don't do points Ted but, thats not the important end... open, lift, close. That's the important bit or bits.. If memory servs me right a dwell meter is the way to go
Baza

I had the day off from school when we did inglish.
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#3 PostAuthor: Garn 1 » Tue Jul 28, 2009 11:34 pm

Ted, the fibre heel should bear on the cam with some pressure from the curved steel blue spring strap. The points are controlled by the heel bearing on the this cam. If there is no pressure on the cam you will not be able to set the points to the required 0.015" odd! .... No gap ever between heel & cam!

Note: I have found some replacement points of the Z1/ Z900's are hard to set ... something to do with their dimensions ... maybe off a Z650!

RegardZ ~ Garn
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

#4 PostAuthor: DogsbolloxofZ1B » Wed Jul 29, 2009 8:56 am

Echo Garns comments, I've had trouble in the past & found that the points were either Z650 or pattern so there must be a subtle difference.
Top
User avatar
ted1r
Area Rep.
Area Rep.
Posts: 2907
Joined: 29th May 2008
Location: Cleethorpes Lincolnshire

post

#5 PostAuthor: ted1r » Wed Jul 29, 2009 5:08 pm

Thanks but I have a 3mm gap tween points heel and rotor when points closed ,I think the rotors worn, has anyone else come across this b4?


Ted
"Work this is why I did it"



"I've had more minutes than I have left"



Z1R D1

Granada

vantastic Transit........

KLE650
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#6 PostAuthor: tlc » Wed Jul 29, 2009 5:23 pm

Hmmmmmmmmm.

Rotor steel......................points fibre / resin.

Do the math !
Asphalt Cowboy

Phil Churchett award winner 2015
Top
User avatar
steve bowdler
Area Rep.
Area Rep.
Posts: 1793
Joined: 20th Apr 2005
Location: swansea s.wales

#7 PostAuthor: steve bowdler » Thu Jul 30, 2009 6:14 am

tailiftchris wrote:Hmmmmmmmmm.

Rotor steel......................points fibre / resin.

Do the math !


Are you trying to say something ?? :lol: :lol:
Top
User avatar
ted1r
Area Rep.
Area Rep.
Posts: 2907
Joined: 29th May 2008
Location: Cleethorpes Lincolnshire

post

#8 PostAuthor: ted1r » Sat Aug 01, 2009 5:33 pm

Lost the plot with this timing, got it set bang on static runnig sweet, just been for a run going great till ,back homme i`ve two of the most beautiful blue down pipes and two normal.put strobe on bang on, plugs perfect colour, HELP :!:

Ted
"Work this is why I did it"



"I've had more minutes than I have left"



Z1R D1

Granada

vantastic Transit........

KLE650
Top
User avatar
hillbilly
Hardcore
Hardcore
Posts: 2337
Joined: 31st Jan 2008
Location: lancashire

#9 PostAuthor: hillbilly » Sat Aug 01, 2009 5:44 pm

sounds like a carb problem,running a bit lean on the blue pipe cylinders.
push me shuv you.sez who sez me.
owing p.u.m. (76 z1b)(v reg z1r)
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#10 PostAuthor: Pigford » Sat Aug 01, 2009 5:59 pm

Ted, do yourself a favour & bung on a Dyna S :wink:
And on the 7th day... Zeds were created!
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests