Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

swinging arm??

Work in Progress

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
flybo
Regular Poster
Posts: 41
Joined: 6th Jul 2009
Location: luton

swinging arm??

#1 PostAuthor: flybo » Thu Jul 30, 2009 10:01 am

hi im newbe to the site...i have a z1000a1. i would like to fit a zxr 5.5 180 rear wheel. to the back. and would like to no wot type swinging arm would fit with not to much mucking about??? any imfo would be great help..thanks brian..
Top
Padders
Hardcore
Hardcore
Posts: 4875
Joined: 15th Jan 2006
Location: Grimsby Lincolnshire

#2 PostAuthor: Padders » Thu Jul 30, 2009 11:25 am

ZRX1100 swingarm not too much bother only real work is to extend out the top shock mounts. If you are not too bothered about using the ZXR wheel you can fit the complete back end use an offset sprocket and your away. Check out the German Zeds in the meeting section a few of those have had the ZRX1100 swingarm fitted. Plus Chris in the projects section has had one fitted. Don't use the ZRX1200 as I had one fitted to a Zed I bought and its a bit too long and messes up the handling. Though if you are going up the strip its the one to go for. If you use the standard ZRX1100 rear shocks they are 365mm against the standard 350mm so lift the back slightly and look better.

Cheers
Top
flybo
Regular Poster
Posts: 41
Joined: 6th Jul 2009
Location: luton

thanks

#3 PostAuthor: flybo » Thu Jul 30, 2009 9:12 pm

thanks..great help
Top
Post Reply

Return to “Projects”

Who is online

Users browsing this forum: No registered users and 6 guests