Switchgear

Geoff Meager · #1 PostAuthor: **Geoff Meager** » Wed Jul 08, 2009 9:50 pm

Anyone know of any switchgear available for a KZ1000ltd K1 ...... or any other that will suit .....?

Geoff Meager · #2 PostAuthor: **Geoff Meager** » Thu Jul 09, 2009 8:56 am

These are the ones I want to replace ........
The L/H one has a buggered horn & indicater switch & the R/H one has stripped threads

trikerdrew · #3 PostAuthor: **trikerdrew** » Fri Jul 10, 2009 7:44 am

If that is all that is wrong with them could repair them cheaply.

Oh dear.By cheaply I meant economically, not nastily :lol:

If you get stuck give me a shout

regards

drew

chrispeckitt · #4 PostAuthor: **chrispeckitt** » Fri Jul 10, 2009 10:08 pm

THink I might have some from Z1100 A1, will check the boxes and let you know. Chris

Geoff Meager · #5 PostAuthor: **Geoff Meager** » Mon Jul 13, 2009 9:58 pm

So .... anyone out there know if I can replace them with anything else that is compatible with the wiring ????????
without having to do any drastic work :??

chrispeckitt · #6 PostAuthor: **chrispeckitt** » Tue Jul 14, 2009 8:30 am

Geoff, Yes I have some but as you said Can anyone advise if the Z1100 A1 shaft is compatible? I think the condition of these are ok but there in a box of other bits that I have. They look ok, complete with wiring etc.. so anyone out there can advise we can move on a bit. Chris

phil churchett · #7 PostAuthor: **phil churchett** » Tue Jul 14, 2009 4:47 pm

There is a site that lists what different models each part fits. However, i can't remember what it is!
Hopefully someone with a better memory will?

Big John · #8 PostAuthor: **Big John** » Tue Jul 14, 2009 7:07 pm

Geof, Z1000J,r,1100R,gpZ1100b2,750r1 will fit the euro/uk spec will have the extra light switch wires and won't have the hazard switch/wires.

Geoff Meager · #9 PostAuthor: **Geoff Meager** » Tue Jul 14, 2009 8:46 pm

Thanx John .... your a star
the next beer is on me mate

That is 10 times more information than I got from Dave at Z Power ... :twisted:

seems to me they can't be arsed to help ... unless it's a proper Zed

london calling · #10 PostAuthor: **london calling** » Wed Jul 15, 2009 4:07 am

Geoff,you'll probably find that the Z1000J,GPz1100,Lawson,etc whilst looking the same will have different wiring configurations.
I'm pretty sure that U.K. spec Z1000 LTD is unique to that model,I had to get for mine many years ago.
If you get hold of a genuine Kawasaki Z1000J/GPz1100 workshop manual,
it's got full colour diagrams of all the similar models.

Geoff Meager · #11 PostAuthor: **Geoff Meager** » Wed Jul 15, 2009 10:42 pm

Many thanks Jack .... I have returned E-mail

Geoff Meager · #12 PostAuthor: **Geoff Meager** » Wed Jul 15, 2009 10:46 pm

Big John wrote:Geof, Z1000J,r,1100R,gpZ1100b2,750r1 will fit the euro/uk spec will have the extra light switch wires and won't have the hazard switch/wires.

So anyone got any for sale :?:

Switchgear

Switchgear

Have not got any ,but...

switch gear

Who is online