Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Float Height

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
DAVE LEWIS

Float Height

#1 PostAuthor: DAVE LEWIS » Sun Jun 28, 2009 2:55 pm

Hi Guys I have a Z900A4 is there a float height setting without the special tool or a rough start up setting guide or failing that is the tool available to buy?.

Dave Lewis
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#2 PostAuthor: Pigford » Sun Jun 28, 2009 3:13 pm

Try 18-19mm as a rough guide....
And on the 7th day... Zeds were created!
Top
DAVE LEWIS

Floats

#3 PostAuthor: DAVE LEWIS » Sun Jun 28, 2009 4:49 pm

Cheers I have an ultrasonic cleaning kit and have done the jets but looks like i'm going to have to start from the basics thanks for the info, will let you know how i get on.

Dave
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#4 PostAuthor: Pigford » Sun Jun 28, 2009 5:51 pm

Dave, the jets are easy to clear, its the passageways in the carbs that cause most of the problems :!:
And on the 7th day... Zeds were created!
Top
DAVE LEWIS

Carbs

#5 PostAuthor: DAVE LEWIS » Sun Jun 28, 2009 9:35 pm

UMM thought so well looks like this week will be busy at work stripping carbs and cleaning, Should have done it properly first time.

Dave L
Top
User avatar
Z.O.A
100Club
100Club
Posts: 151
Joined: 31st Mar 2009
Location: Westmeath, Ireland.

Re: Float Height

#6 PostAuthor: Z.O.A » Mon Jun 29, 2009 5:00 pm

DAVE LEWIS wrote:Hi Guys I have a Z900A4 is there a float height setting without the special tool or a rough start up setting guide or failing that is the tool available to buy?.

Dave Lewis

The correct float height for the 26mm carbs on the A4 is 22mm +/- 1mm, turn them upside down and measure from the gaket mating surface to top of float, make sure sure both sides of the float are the same height as well.
Top
User avatar
chrisu
Moderator
Posts: 4367
Joined: 3rd Sep 2005
Location: herts

#7 PostAuthor: chrisu » Mon Jun 29, 2009 5:14 pm

this may help.

Image
Top
User avatar
chrisu
Moderator
Posts: 4367
Joined: 3rd Sep 2005
Location: herts

#8 PostAuthor: chrisu » Mon Jun 29, 2009 5:15 pm

or this if you use the proper tool............

Image
Top
DAVE LEWIS

Float height

#9 PostAuthor: DAVE LEWIS » Mon Jun 29, 2009 5:38 pm

Thanks for the info, will let you know the outcome.

Dave
Top
DAVE LEWIS

Update

#10 PostAuthor: DAVE LEWIS » Tue Jun 30, 2009 5:59 pm

Well completly stripped the carbs today and ultrasonic cleaned the carb bodys and jets rebuilt checked float heights, some needed tweeking.

Have just fitted and fired up first time and runs sweet have just balanced the carbs and ticks over nice.

So £90 on a cleaner well worth it.

Dave L
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 12 guests