hillbilly z1 rebuild

hillbilly · #16 PostAuthor: **hillbilly** » Sun May 24, 2009 4:48 pm

as long as i get them the right way round when i put the cams in it shud be ok. :lol:

hillbilly · #17 PostAuthor: **hillbilly** » Mon May 25, 2009 6:47 pm

heres a picture of my seat foam when i took it off the base.it says (76z1)anyone else seen this before. :?:

hillbilly · #18 PostAuthor: **hillbilly** » Mon May 25, 2009 6:51 pm

ive got most of the blue holymer rubber out of the barrels now.

Pigford · #19 PostAuthor: **Pigford** » Mon May 25, 2009 6:51 pm

Hillbilly - I think its a bit like the Willy Wonka Golden Ticket.... You have won a new Z900.... but must collect it before Dec 1977 :??

#20 PostAuthor: **paul doran** » Mon May 25, 2009 10:14 pm

Hillbilly it's looking good
are you going the York Rally

hillbilly · #21 PostAuthor: **hillbilly** » Tue May 26, 2009 3:18 pm

i would love to go,but funds are low right now,for luxurys like traveling and enjoying ones self,besides i dont know were it is,has anyone got an address for it,might be able to get there for one day if its not to far away.

hillbilly · #22 PostAuthor: **hillbilly** » Sat May 30, 2009 4:48 pm

number under tank.

tank being stripped of paint.

Keefleaf · #23 PostAuthor: **Keefleaf** » Sat May 30, 2009 8:33 pm

Are you using that later,Mk11 head?

hillbilly · #24 PostAuthor: **hillbilly** » Sat May 30, 2009 8:55 pm

i was going to,but if you want it ,make me an offer, :lol:

or were you just pointing out that it was a mk11 head,that is going on a 1973 z1.it will look in place with the pair of 1972 front discs i have to go on it with the dates stamp 7s.sorry to everyone but im not a concours person or a rivett counter. :roll:

am just building mi bike with what i can get hold of, :wink:

hillbilly · #25 PostAuthor: **hillbilly** » Tue Jun 02, 2009 4:36 pm

hillbilly · #26 PostAuthor: **hillbilly** » Tue Jun 02, 2009 5:27 pm

hillbilly · #27 PostAuthor: **hillbilly** » Fri Jun 05, 2009 7:56 pm

Pigford · #28 PostAuthor: **Pigford** » Fri Jun 05, 2009 8:04 pm

HILLBILLY.............. those pistons look like low-comp turbo MTC type :shock:

hillbilly · #29 PostAuthor: **hillbilly** » Fri Jun 05, 2009 8:08 pm

and what does that meen :?:

i thought they were russ colins pistons,came with 1197 barrels. :?:

hillbilly · #30 PostAuthor: **hillbilly** » Mon Jun 22, 2009 7:32 pm

valves are in tonite,just trying to get some answers to a gasket question.

hillbilly z1 rebuild

Who is online