Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Another Chain n Sprocket Question

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
bigmac103
100Club
100Club
Posts: 489
Joined: 17th Sep 2008
Location: Abu Dhabi

Another Chain n Sprocket Question

#1 PostAuthor: bigmac103 » Sun May 10, 2009 1:25 pm

Can you use the same chain for the 35 and 33 tooth rear sprocket?
Thankz
B
Lost in the desert somewhere
Top
User avatar
compo z1r
ZedHead
ZedHead
Posts: 1055
Joined: 25th Sep 2008
Location: SQUIRES NORTH YORKS
Contact:
Contact compo z1r

Re: Another Chain n Sprocket Question

#2 PostAuthor: compo z1r » Sun May 10, 2009 3:38 pm

bigmac103 wrote:Can you use the same chain for the 35 and 33 tooth rear sprocket?
Thankz

B


yes if its the same pitch. :roll:
THE ORIGINAL TARMAC TERRORIST

Z1000S !! Z1R Z810 [ project ] FZR 1000 RU KTM SXF 250 / 08 R6 and my dog zak.???

Z1OC # 886
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#3 PostAuthor: Pigford » Sun May 10, 2009 5:13 pm

Bigmac.... as long as you keep to the same format - ie: 630 or 530 ..etc.

If you're replacing an old knackered sprox with a new one, then there may be rapid wear on the new sprox, as the cahin set wears/stretches with use :shock:
And on the 7th day... Zeds were created!
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#4 PostAuthor: Garn 1 » Sun May 10, 2009 8:35 pm

Guys, I think BigMac is concerned about the length of the 630 chain. That is, will the 33 sprocket with 2 less teeth still fit in the adjustment range of the usual 92 link chain? Or, will he have to remove a link? I not sure of the answer I think it both sprocket would serve the one chain length.... Could be wrong!
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
User avatar
floydsz1
Hardcore
Hardcore
Posts: 1476
Joined: 24th Jun 2007
Location: SUNNY MORECAMBE

#5 PostAuthor: floydsz1 » Sun May 10, 2009 8:55 pm

I have fitted z900A4 rear sprox to a Z1 ie a smaller rear to lower revs for better cruising etc without having to remove a link, unless the chain is very worn and stretched.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 15 guests