Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

oil & neutral light

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
sp.milne
100Club
100Club
Posts: 379
Joined: 5th Feb 2009
Location: BUCKS

oil & neutral light

#1 PostAuthor: sp.milne » Sat May 02, 2009 7:42 pm

Been out on my z1000 today and have noticed the oil & neutral light don't work intermittely. check inside head light all seems OK no bad or loose connections should i be looking else where
Top
User avatar
zedrider
100Club
100Club
Posts: 256
Joined: 24th Aug 2008
Location: southwales

#2 PostAuthor: zedrider » Sat May 02, 2009 10:36 pm

have a look at the fuze box . you may be getting an itamitent fault there rather than a blown fuze . my old girl has a habbit of shakeing lose her fuzes so that the eletric start wont work . or the tail light stopes working . just a quick puch at her box seams to solve the issue . maybe it will yours too good luck
zed
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#3 PostAuthor: tlc » Sun May 03, 2009 5:28 am

Stu.

I am out and about today in the van if needed ? Happy to pop up and assist.

Have all tools required and parts / repair books. Let me know.
Asphalt Cowboy

Phil Churchett award winner 2015
Top
User avatar
Jumbo
Custard Cream
Custard Cream
Posts: 697
Joined: 9th Jan 2005
Location: Devon

#4 PostAuthor: Jumbo » Sun May 03, 2009 8:11 am

I had a similar problem on my Rickman which as far as the electrics is the same as your bike. I found that one of the connector blocks wasn't 100% and when I moved the bars that caused the problem. I managed to clean the connections as best as I could and then used two cable ties to hold it tight together :lol:
LE to JOG on a z900

P.U.M.
Top
User avatar
sp.milne
100Club
100Club
Posts: 379
Joined: 5th Feb 2009
Location: BUCKS

#5 PostAuthor: sp.milne » Sun May 03, 2009 4:21 pm

Thanks for the advise. Had it striped out this morning and found i had a broken or loose wire between idiot lights and head light shell.Thanks for your offer Chris would have taken it up but read your post after i had found the fault.

cheers Stuart
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests