Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Newtronic Ignition System

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Z1B Alan
100Club
100Club
Posts: 250
Joined: 14th Nov 2006
Location: ellesmere port

Newtronic Ignition System

#1 PostAuthor: Z1B Alan » Tue Jan 30, 2007 10:01 pm

Hi to you all, I have a z1b fitted with newtronic eletronic ignition and was wondering if anybody knows how to check that it is correctly set up ?.
I dont have any known problems with the system Iwould just like to check it before the bike goes on the road. the bike is standard in all ther respects
any suggestions would be kindly accepted. :?: :shock: :D
They run, They break , You spend and so it goes on
Top
Ed Z1-R
Hardcore
Hardcore
Posts: 2347
Joined: 14th Oct 2005

#2 PostAuthor: Ed Z1-R » Tue Jan 30, 2007 10:06 pm

Do the instructions mention that the final ignition timing should be set up with a strobe light :?: Previous instructions should be straight forward mate
Top
User avatar
Z1B Alan
100Club
100Club
Posts: 250
Joined: 14th Nov 2006
Location: ellesmere port

#3 PostAuthor: Z1B Alan » Tue Jan 30, 2007 11:12 pm

I dont have any instructions at all ? :?
They run, They break , You spend and so it goes on
Top
User avatar
rickman CRR
Custard Cream
Custard Cream
Posts: 948
Joined: 13th Dec 2004
Location: Scotland

#4 PostAuthor: rickman CRR » Wed Jan 31, 2007 10:12 am

http://www.lumenition.com/newtronic/

Perhaps you should contact the new owners for an instruction leaflet.

Most systems can be checked by strobe light?
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#5 PostAuthor: Pigford » Wed Jan 31, 2007 7:01 pm

I think the Newtronics is the old Pirahna optical system. If it is optically triggered, make sure you do NOT set it up in bright sunlight! Ideally do it when the sun is NOT out or cloudy or even better in the garage with minimal lighting. The optics can be confused in "bright light" (ET?) and your timing will be out. :shock:
And on the 7th day... Zeds were created!
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 15 guests