Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Tank Repair

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
bakey
100Club
100Club
Posts: 347
Joined: 1st Oct 2008
Location: Liverpool

Tank Repair

#1 PostAuthor: bakey » Fri Mar 27, 2009 10:17 am

Hi guys

wondered if any of you have used that epoxy stuff for tank repair? Is there a better brand etc to go for and is it very difficult?

I dont even think the tank from my spare paint set has a leak but while it is off and dry, im thinking this is probably a good time to protect it etc.

Also, when it comes to decals for the A4 tank. Were is a good place to go for them?
''Who's motorcycle is this?''
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#2 PostAuthor: Garn 1 » Fri Mar 27, 2009 10:35 am

Bakey, if your tank isn't leaking or it hasn't weak spots due to rust, my advice is don't use these tank lining epoxies. Whereas, there are good products on the market "If it ain't broke, don't fix it'. I've seen some tanks with the lining lifted and that is a mess.
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
KZCol
100Club
100Club
Posts: 122
Joined: 3rd Jun 2008
Location: Edinburgh

#3 PostAuthor: KZCol » Fri Mar 27, 2009 10:47 am

I used the tank repair kit from Frosts with good results if it's any help.

Cheer
Col.
Top
User avatar
london calling
Hardcore
Hardcore
Posts: 3992
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

#4 PostAuthor: london calling » Fri Mar 27, 2009 2:37 pm

For decals you want
THE IMAGE WORKS,
TEL:0115 944 3111 and speak to Graham :wink: :D
www.the-image-works.co.uk
Jack
Top
User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1729
Joined: 1st Sep 2007
Location: Leicestershire

#5 PostAuthor: KWACKERZ1 » Fri Mar 27, 2009 4:25 pm

Frosts do good stuff but if its ok leave it as is, Just remember when storing the bike for a while leave the tank full it stops the moisture and corrosion then.
Top
User avatar
Redbeard
Hardcore
Hardcore
Posts: 1264
Joined: 7th Feb 2009
Location: Aylesbury, Buckinghamshire

#6 PostAuthor: Redbeard » Mon Mar 30, 2009 6:17 pm

bakey I'm about to use that epoxy stuff, i think halfords do it, cos my tank has a tiny hole (not visible) where the plate for the fuel sender unit fits to the tank. I'll let you know how i get on. i also flushed/cleaned it with that Frosts kit Kwackerz1 and KZCol mention and it came up pretty good. Didn't use the sealant though because i just wanted to remove the gunk and old fuel. maybe i should have :roll:
1979 Z1000ST
Top
User avatar
Davy Doherty
Hardcore
Hardcore
Posts: 3009
Joined: 28th Oct 2003
Location: Derry Ireland

#7 PostAuthor: Davy Doherty » Mon Mar 30, 2009 6:33 pm

Im with Garn DON'T us it if you don't have to..
Life's too short!
Top
User avatar
bakey
100Club
100Club
Posts: 347
Joined: 1st Oct 2008
Location: Liverpool

#8 PostAuthor: bakey » Mon Mar 30, 2009 6:56 pm

good advice lads...if it aint broke :oops:
''Who's motorcycle is this?''
Top
User avatar
zedrider
100Club
100Club
Posts: 256
Joined: 24th Aug 2008
Location: southwales

#9 PostAuthor: zedrider » Mon Mar 30, 2009 8:33 pm

ive only ever used petseal . follow the instructions . but i wouldent use it till you realy need too .
zed
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests