Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1-R
Moderators: KeithZ1R, chrisu, paul doran, Taffus
It exits the tank via a right angle elbow piece
Incidentally this right angle piece is poor quality and very prone to self destructing and will eventually split along the seam.
It runs horizontally following the frame - looking from the top – between the middle and right hand frame run – and then dips down between carb 3 & 4.
That’s where mine goes!
Cheers
Kevin
Incidentally this right angle piece is poor quality and very prone to self destructing and will eventually split along the seam.
It runs horizontally following the frame - looking from the top – between the middle and right hand frame run – and then dips down between carb 3 & 4.
That’s where mine goes!
Cheers
Kevin
Who is online
Users browsing this forum: No registered users and 14 guests