Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Gear positioning lever location

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Robw
Custard Cream
Custard Cream
Posts: 799
Joined: 8th Oct 2007
Location: Suffolk

Gear positioning lever location

#1 PostAuthor: Robw » Sun Mar 01, 2009 1:02 pm

Hi, does the gear positioning lever go in the first gap or second gap on the shift drum. It fits nicely in the second(inner) gap however in the photo's in the manual it looks like it goes in the outer gap.
Image

Sorry about the focus but the engine is upside down.

Cheers Rob[/img]
Z1000R/ZRX, RD 125LC, Zx7r , Endurance racer
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#2 PostAuthor: Garn 1 » Sun Mar 01, 2009 8:13 pm

Sorry RobW, I think we need a decent photo, unless someone has the assembly in front of them. I do recall a bit of thinking required in that area.
RegardZ
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#3 PostAuthor: Pigford » Sun Mar 01, 2009 8:22 pm

The pawl arm locates on the roll pins for a positive engagement.....

If I recall correctly, it is the centre ring...... but its fairly obvious if you can peer in between.... :wink:
And on the 7th day... Zeds were created!
Top
Rich
Hardcore
Hardcore
Posts: 2835
Joined: 4th Mar 2003

#4 PostAuthor: Rich » Sun Mar 01, 2009 8:30 pm

They hook onto the pins in the outer part as yours look to be doing. The detent arm locates in the inner one.
Rich
 diplomacy is a form of art - I was never any good at art
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 17 guests