Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Thread Size??

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

Thread Size??

#1 PostAuthor: DogsbolloxofZ1B » Sat Feb 21, 2009 8:04 pm

Anyone know what the thread size is for:

a) Z1 Caliper brake line connection (Not the nipple)
b) Z1 brake pressure switch.

I'm guessing its a pipe thread, maybe 1/4"NPT.

ta.
Mike
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#2 PostAuthor: tlc » Sat Feb 21, 2009 8:48 pm

I always thought it was M10 x 1.0mm.

At least that`s what it was on my LC
Asphalt Cowboy

Phil Churchett award winner 2015
Top
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:
Contact Ginger Bear

#3 PostAuthor: Ginger Bear » Sun Feb 22, 2009 12:17 pm

I think it's M10 x 1.25mm :roll:
Top
User avatar
tlc
International Rep
Posts: 5239
Joined: 6th Nov 2007
Location: Aylesbury

#4 PostAuthor: tlc » Sun Feb 22, 2009 1:09 pm

I still reckon it`s 10 x 1.0 :|

Sorry my old Yam one is 1.0mm.

Just checked an old distributor block and reckon you are right :oops:

You could be right about the pressure switch Mike. 1/4 NPT looks good to me.
Asphalt Cowboy



Phil Churchett award winner 2015
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

#5 PostAuthor: DogsbolloxofZ1B » Sun Feb 22, 2009 10:11 pm

Thanks guys!
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

#6 PostAuthor: DogsbolloxofZ1B » Tue Feb 24, 2009 2:27 pm

FYI, the brake pressure switch is 1/8" *27 NPT

Mike
Top
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:
Contact Ginger Bear

#7 PostAuthor: Ginger Bear » Tue Feb 24, 2009 2:44 pm

Think I've learnt something there! I was thinking about banjo bolts.......oops :??
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#8 PostAuthor: Pigford » Wed Feb 25, 2009 7:43 pm

Not wot Dogs is on about, but dead handy link.............

http://www.lantechsolutions.co.uk/produ ... leBolt.php
And on the 7th day... Zeds were created!
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

#9 PostAuthor: DogsbolloxofZ1B » Wed Feb 25, 2009 7:52 pm

That's a handy link. I got hold of an 1/8"NPT tap today and its not right! I never thought this would be a metric thread as it appears to be tapered, however, its an M10 * 0.75 Pitch i.e an M10 Fine thread. I've got one of those in the garage..

Mike
Top
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:
Contact Ginger Bear

#10 PostAuthor: Ginger Bear » Wed Feb 25, 2009 8:15 pm

Mike, M10 x 0.75 is a mighty fine pitch indeed. Just in case it turns out to be M10 x 1.0 which is still fine compared to the M10 x 1.25 normally called fine by most fastener suppliers. I have a tap you can borrow! M10 x 1.0 that is!
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

#11 PostAuthor: DogsbolloxofZ1B » Thu Feb 26, 2009 9:02 am

Now I'm confused, I measured this thread with a set of thread gauges and its definitely an 0.9mm pitch and 9.9mm OD, I've never heard of a
M10*0.9mm thread size.

This must be some odd-ball thread. My thread gauges cover a huge range and it not 0.75 or 0.8 or 1.0 its def 0.9mm pitch.

Plenty of head scratching now. :roll: :roll:
Top
User avatar
AL MARSHALL
100Club
100Club
Posts: 369
Joined: 13th Feb 2007
Location: BURTON ON TRENT/ TAMWORTH

brake

#12 PostAuthor: AL MARSHALL » Thu Feb 26, 2009 9:10 am

hi dogs, the brake light switch thread is 1/8 bsp taper. the other connections are m10x1.25(banjo) regs al
trouble.......seek and ye shall find
www.z-clocks.co.uk
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

#13 PostAuthor: DogsbolloxofZ1B » Thu Feb 26, 2009 1:09 pm

Al many thanks, that checks out correctly, longtime since I was a hands-on engineer.

This website is useful http://www.ring-plug-thread-gages.com/t ... arts7.html :)

Cheers,
Mike
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 10 guests