Just bought Z1000J2 in bits

[saab9002]

Hi All,

I have just bought a Z1000J2 1982, but not yet collected it !. The motor is in bits but has a new timing chain with a spare welded and balanced crank,new bored out block,new wiseco piston set,new half race cams,brand new,dyno ignition still in box,new heavy duty clutch,springs etc,head rebuilt by Debens new valves/springs and flowed, original carbs. It needs putting together.Rolling chassis slab yolks original forks (pitted) gsxr front wheel/discs/calipers.Tl1000 rear wheel,braced S/A and piggy back shocks.Tankisrough but solid seat needs recovering,wiring yuk,frame powder coated and same number as log book.It does look well scruffy
So the first question is, can I use my GPZ1100B1 Clymer manual to rebuild the motor or have I got to get a manual for a Z1000J2 ?
When I collect it I'll take photos and try and work out how to post them, the other problem is that I haven't finished my GPZ1100B1 yet, but I couldn't turn this down, my missus will have a fit, I told her I was only going to look at a few bits ! Chris

[big green bus]

you can use the B1 manual

[london calling]

I've got a genuine Kawasaki workshop manual for the Z1000J and Gpz B models if you'd like to borrow it to build your bike.
Also I'm having a big clear out of 1000J and GPz1100 engine and chassis parts if you need anything.
Got a pair of really good part worn Bridgestone BT45 tyres in GSXR750 slabby sizes 110/80 x 18" and 140/70 x 18".£50 the pair + £15 postage.

[saab9002]

Thanks BIG GREEN + LONDON CALLING
I think I will take you up on that,got to get it home first .
Chris

[london calling]

No worries Chris,just let me know when you want it.
I'm at the Donno show FEB 7th/8th all weekend,if you're going and want to pick it up.

[saab9002]

Jack Have you got a pair of Z1000 or GPZ1100 fork legs in your collection ?
Chris

[london calling]

Hi Chris,I've got some fork legs

[paul doran]

any pictures

[saab9002]

Paul,
Photos to come once I've collected, hopefully this weekend
Chris

[saab9002]

Well here we go 1st attempt at posting pics ! and I did say it was a bit scuffy
[img] http://i533.photobucket.com/albums/ee33 ... od-008.jpg
[/img]






These are some of the goodies I got with it






Loads of work to do and
Message for Jack, I'm going to try and get up to Donnington and would appreciate the loan of your manual, but I think ive gone over budget this month, re; forks.
Does anyone know where the nearest vapour cleaners are to southampton area, google brings up nothing ?
cheers Chris

[saab9002]

Is that better?

[london calling]

Manual will be waiting for you at Donno show.
Speak to Keef the Teeth a.k.a. KEEFLEAF about vapour blasting.
He's based on the I.O.W.
Looks like Suzuki wheels,discs,swing arm,etc.
I'd go to Suzuki forks to make it easier to fit calipers,etc than feck about with the 38mm Z forks.
Just remember Chris "there's nothing wrong with that bike/car/wife/etc,that money won't fix"

[Pigford]

Saab, that looks promising matey...............

Just fitted a set of them pistons in me Lawson

Nice lumpy-bumpy cam....... I got Megacycle .410's in mine

Just gotta sort me RFS38's out now.... Have to compare notes.....

Meet up for a POOLE QUAY Tuesday... summer time You should have it up & running by then

[Al]

Rumour has it that my local shot blasters have bought a vapour blaster and are threatening to use it.

I am ten miles North of Basingstoke.
They are half a mile down the road from me.

I can find a number for them if you dont find one more local to you.

Also; Debbens get a lot of stuff vapour blasted with the ceramic stuff. Might be worth having a word with them. They are along the coast at Ringwood. Details in the links section top right of page!


AL


J1

[saab9002]

Thanks Jack, Donnington and a bevvy or two, Monsieur Pigford I think the GPZ will be ready first,waiting patiently for me to put in the matching rear end,(the scabby h---a is on epaybay as we speak), and Mr Zorded is 10 m north of B,stoke anywhere near Rother wick, I used to live there many moooons ago?
Heres the 90% finished GPZ1170



chris