had some on mi bike an it wunt run right,(brand new)from debbens.could it have burnt mi coils out. 
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
dyna coil testing
Moderators: KeithZ1R, chrisu, paul doran, Taffus
dyna coil testing
dyna ignition ,how do you check if the pickup coils are ok.any suggestions. had some on mi bike an it wunt run right,(brand new)from debbens.could it have burnt mi coils out.
had some on mi bike an it wunt run right,(brand new)from debbens.could it have burnt mi coils out. push me shuv you.sez who sez me.
owing p.u.m. (76 z1b)(v reg z1r)
owing p.u.m. (76 z1b)(v reg z1r)
Primary resistance should be 3 ohm between the low voltage terminals. Don't know what secondary resistance should be but there should be one. You could rig a spark tester as shown in Kawa manual. If the brass inserts in the end turn they break the LT conection.
Rich
diplomacy is a form of art - I was never any good at art
diplomacy is a form of art - I was never any good at art
Who is online
Users browsing this forum: No registered users and 13 guests