Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

ignition/points housing

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
rafstopcarryon
100Club
100Club
Posts: 374
Joined: 5th May 2007
Location: clevelandsestershershire

ignition/points housing

#1 PostAuthor: rafstopcarryon » Fri Dec 26, 2008 7:10 pm

after changing cranks(z9 bottom end,later crank?)..........is it just the oil seal in the ignition housing or a differant housing all-together that stopping it fittitng over the said crank :| ie can i change the dimensions of the oil seal within the housing for it to fit?

whats with the -3 and -4 on the reverse of them? (on the two i've got? model id?)

raf
Top
Rich
Hardcore
Hardcore
Posts: 2835
Joined: 4th Mar 2003

#2 PostAuthor: Rich » Sat Dec 27, 2008 8:50 am

What crank have you got in it? If it's a hy-vo chain crank you will need a different cover. If you are running Dyna, Fer can tell you which one to look out for.
Rich
 diplomacy is a form of art - I was never any good at art
Top
FER
Auld Heedyun
Posts: 840
Joined: 10th Jan 2002
Location: Glenfoot

#3 PostAuthor: FER » Sat Dec 27, 2008 10:08 am

Later cranks need a bigger oil seal and there isn't enough metal in an old casing to fit newer oil seal . Just get a newer casing .







fer
Top
rafstopcarryon
100Club
100Club
Posts: 374
Joined: 5th May 2007
Location: clevelandsestershershire

#4 PostAuthor: rafstopcarryon » Sat Dec 27, 2008 4:08 pm

thankyou for yeh reply's ........(note to self, go direct to the wanted section :wink: )


raf
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 17 guests